Find Your Interest: Categories

Copper Powder 99.8%, Mesh 325

Ultra fine copper powder with spheroidal particles for high conductivity applications.
SKU: CU301
Select Option ▼
Qty:
For MSDS Go to Downloads Tab

Copper Powder


Copper powder, high purity, water atomized, hydrogen reduced ultra fine copper powder with spheroidal particles and clusters. Higher conductivity. Lower Density.
May be used for metal injection molding as well as other applications were the conductivity and purity of product is important.
HTS Code: 7406.10.0000
NMFC: 30743
CAS: 7440-50-8

Recommended for:

  • Thick and Thin Film pastes
  • Conductive Inks, paints and pastes
  • Injection Molding
  • Thermal management
  • EDM Electrodes
  • Antifouling Paint
  • Thermal Sprays
  • Sintered alloys/ products
  • Brazing/ soldering paste

Typical Analysis:
Copper: 99.31%
Hydrogen Loss: 0.39%
Apparent Density: 2.97 g/cc
SIEVE ANALYSIS
60 MESH: 0%
-60/ 80 MESH: 0%
-80/ 100 MESH: 0%
-100/ 140 MESH: TR
-140/ 200 MESH: TR
-200/ 325 MESH: 0.6%
-325 MESH: 99.4%

Note: Pure copper powders do not show continuity or conductivity by a multimeter. I think there are two reasons for that. One is the low voltage used for the test. The other is lots of air and weak contacts between the particles. They will show conductivity with higher voltage, when they are compacted and when they are mixed with some oil or resin to form a paste.

 

  • Availability: In Stock
  • Model: CU301