Metals
Coarse Steel Powder Mesh 100
Coarse steel powder mesh 100 is an imported iron-steel powder that may have some contamination caused by repackaging from broken paper bags into plastic or metal pails. It can be used for soil, concrete, sculpture, or as a substitute for cast iron powder. Some packages may have been damaged and will be repackaged before shipping.
Applications of S100 include performing science experiments related to magnetism or electromagnetism, creating a rust effect in sculptures, concrete, and other structures, and as a plant nutrient as a source of iron.
Key Features:
- Coarse steel powder mesh 100 for soil, concrete, sculpture, and science experiments
- May have some contamination due to repackaging from broken paper bags
- Chemical analysis shows carbon, manganese, silicon, sulfur, and phosphorous content
- Also known as black iron powder and iron filing
- Pay as low as $1.25/lb for special orders of 3000-Lb or more
Product Specifications:
Chemical Analysis | Range |
Carbon | 0.8% - 1.2% |
Manganese | 0.35% - 1.2% |
Silicon | 0.4% Minimum |
Sulfur | 0.05% Maximum |
Phosphorous | 0.05% Maximum |
Note: Clumped product in 55-lb pails is only recommended for acid reactions, stain production, soil fortification, and some rust effect applications. No COA is available for this product.
Similar Products:
- Cast Iron Powder
- Steel Powder Mesh 200
- Iron Filing
- Magnetic Iron Powder
- Iron Oxide Powder
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Aluminum Metal Electrodes
Looking for high purity aluminum electrodes for scientific experiments? Look no further than our aluminum metal electrodes! These electrodes measure 5" x 3/4" x 3/64" (12cm x 2cm x 1.2mm), and are perfect for use in demonstrations, chemical experiments, and physics experiments related to density and heat conductivity. Please note that metal electrodes have sharp edges, so caution should be exercised when handling them.
Product Specifications
Material | High purity aluminum |
Dimensions | 5" x 3/4" x 3/64" (12cm x 2cm x 1.2mm) |
Identification Code | Stamped with "AL" |
Caution | Metal electrodes have sharp edges. |
Similar Products
- Copper Electrodes
- Zinc Electrodes
- Magnesium Electrodes
- Titanium Electrodes
- Nickel Electrodes
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
These electrodes are made of different metals and can be used for various scientific experiments. Copper electrodes are known for their high conductivity and are commonly used in electrochemistry experiments. Zinc electrodes are used in galvanic cells and can also be used for electroplating. Magnesium electrodes are used in studies related to corrosion and electrochemistry. Titanium electrodes are known for their durability and are commonly used in electrochemical studies related to water purification. Nickel electrodes are used in electroplating and electrochemical studies related to batteries.
CAUTION: Metal electrodes have sharp edges.
Perfect for:
- Science teachers and students
- Chemists and researchers
- Physics enthusiasts
- Science fair participants
- Science museums and exhibits
- Science hobbyists and DIY enthusiasts
Super Fine Aluminum Dust
Super Fine Aluminum Dust is a highly sought-after powder used in both industrial and laboratory applications. With its spherical particles and D50 of 5 micron, this aluminum powder is perfect for a variety of uses. Whether you're looking to create high-quality metal products or conduct scientific experiments, Super Fine Aluminum Dust is the ideal choice.
Product Specifications:
Product Name | Aluminum Powder (Fine Dust) |
Alternate Names | Aluminum Powder, Super Fine Aluminum Dust |
Applications | For Industrial And Laboratory Applications |
Particle Shape | Spherical |
Particle Size (D50) | 5 Micron |
Perfect for:
- Industrial manufacturers
- Laboratories
- Chemical engineers
- Metalworkers
- Researchers
- Scientists
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution: This product contains fine dust particles of aluminum which may pose a hazard if inhaled. Use in a well-ventilated area and avoid direct contact with skin or eyes. Proper protective equipment should be worn when handling this product.
Atomized Mesh 325 Fine Aluminum Metal Powder
Atomized Mesh 325 Fine Aluminum Metal Powder is a high-quality aluminum powder that can be used for various purposes. This powder is made of atomized aluminum with particle sizes of about 44 microns and smaller, making it suitable for chemical reactions, laboratory use, and industrial applications. Its fine particle size allows it to be easily dispersed and mixed with other materials, making it an ideal choice for many different applications. Whether you need it for research, manufacturing, or other purposes, Atomized Mesh 325 Fine Aluminum Metal Powder is a reliable and versatile choice.
Product Specifications:
Product Name | Aluminum Powder, Atomized Mesh 325 |
Material | Aluminum |
Particle Size | About 44 micron and smaller |
Applications | Chemical reactions, laboratory use and industrial applications |
Similar Products
- Atomized Mesh 325 Copper Powder
- Atomized Mesh 325 Zinc Powder
- Atomized Mesh 325 Magnesium Powder
- Atomized Mesh 325 Nickel Powder
- Atomized Mesh 325 Iron Powder
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: Aluminum powder can be hazardous if not handled properly. Use in a well-ventilated area and avoid inhaling the powder. Keep away from heat, sparks, and open flames. Store in a cool, dry place away from incompatible materials.
Perfect for:
- Chemical laboratories
- Industrial applications
- Scientists conducting research
- Manufacturing companies
- Chemical engineers
- Metallurgists
Key Features:
- Atomized aluminum powder
- Mesh 325 fine particle size (44 micron and smaller)
- Suitable for chemical reactions
- Ideal for laboratory use
- Useful for industrial applications
- High-quality aluminum material
Axle Rod, 3 Mm X 75 Mm 100 Pack
Looking for a reliable and versatile solution for your plastic wheel needs? Look no further than our Axle Rods, 3 Mm X 75 Mm, Pack Of 100. These axle rods are specifically designed to fit snugly in plastic wheels made in Europe and Asia with a 2.9mm hole, including popular brands like Miniscience.
But that's not all - these axle rods are also perfect for use with plastic gears and small front wheels, such as those found in solar car kits. With a diameter of 3mm and a length of 75mm, these axle rods fit perfectly in wheels or gears with a 3mm bore, without the need for additional fillers or glue.
Available in packs of 100 or 1000, our Axle Rods are a must-have for manufacturers and producers of technology training kits. And if you're producing your own plastic or wooden wheels, don't forget to consider the flexibility of your materials and make the hole smaller as needed to avoid the need for glue or fillers.
Order your pack of 100 Axle Rods today and experience the convenience and reliability that they bring to your plastic wheel needs!
Key Features:
- Pack of 100 axle rods with 3mm diameter
- Fits snugly in plastic wheels made in Europe and Asia
- No need for additional fillers or glue
- 75mm long
- Available in packs of 100 and 1000
- Nominal diameter of 3mm for European and Asian plastic wheels
Product Specifications:
Product Name: | Axle Rod, 3 Mm X 75 Mm, Pack Of 100 |
Diameter: | 3 mm |
Length: | 75 mm |
Compatibility: | Plastic wheels made in Europe and Asia with a 2.9 mm hole diameter, Miniscience brand gear-wheel, plastic gears and small front wheels such as those used in solar car kit. |
Additional Requirements: | No need for additional fillers or glue if used with wheels or gears with 3 mm bore diameter. |
Pack Size: | Available in packs of 100 and 1000. |
Similar Products
- Wheel Axle Rod, 3 Mm X 75 Mm, Pack Of 50
- Plastic Wheel Axle, 3 Mm X 80 Mm, Pack Of 100
- Miniature Axle Rod, 2 Mm X 50 Mm, Pack Of 200
- Steel Axle Shaft, 4 Mm X 100 Mm, Pack Of 50
- Wooden Dowel Rod, 3 Mm X 75 Mm, Pack Of 150
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Note: When producing your own plastic or wooden wheels, please make sure to consider the flexibility of your materials and make the hole smaller as needed to avoid the need for glue or fillers. The actual diameter of the hole in European and Asian plastic wheels is 2.9 millimeters, so please be cautious when using 3 mm axle rods to ensure a snug fit.
Perfect for:
- Manufacturers and producers of technology training kits
- Individuals or companies producing plastic or wooden wheels
- Consumers looking for axle rods with 3-mm diameter to fit snugly in plastic wheels made in Europe and Asia
- Users of miniscience brand gear-wheel, plastic gears, and small front wheels such as those used in solar car kit
- Customers who want to avoid using additional fillers or glue
Ball And Ring
Ball And Ring is a unique product that demonstrates thermal and chain expansion. It helps students understand the concept of thermal expansion by showing the expansion of the ball and ring when heated. The chain expansion is also demonstrated by the expansion of the chain that connects the ball and ring. This product is perfect for educational purposes and can be used in classrooms, labs, or at home. It is a great tool for science teachers, students studying thermal expansion, physics enthusiasts, STEM educators, and science museums and science centers.
Key Features:
- Demonstrates thermal and chain expansion
- Compact and easy to use
- Made of high-quality materials for durability and longevity
Product Specifications:
Product Name | Ball And Ring |
Demonstrates | Thermal Expansion, Chain Expansion |
Materials | Brass (Ball and Ring), Steel (Chain) |
Ball Diameter | 20 mm |
Ring Inner Diameter | 30 mm |
Similar Products:
- Bar and Gauge
- Bi-Metallic Strip
- Thermal Conductivity Set
- Mercury Thermometer
- Gas Laws Demonstrator
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: This product involves heat. Please follow safety instructions carefully and use with adult supervision.
Perfect for science teachers, students studying thermal expansion, physics enthusiasts, STEM educators, science museums, science centers, and home-schooling parents.
Bismuth Pellets (Pack Of 10)
Bismuth Pellets (Pack Of 10) are 99.99% pure, each pellet weighing 10 grams. Bismuth is a unique and valuable addition to any collection of metals. This white, crystalline, brittle metal with a pinkish tinge is the most diamagnetic of all metals, and has a lower thermal conductivity than any metal except mercury. Bismuth also has a high electrical resistance and the highest Hall effect of any metal, making it ideal for science experiments involving magnet levitation. High-purity bismuth can form distinctive and beautiful hopper crystals, and is used in making bismuth alloys, solders, ceramic glazes, fishing sinkers, and casting of bismuth products. Add Bismuth Pellets to your collection of metals today and experience the unique properties of this fascinating metal.
Key Features:
- 99.99% pure bismuth pellets
- Each pellet weighs 10 grams
- Diamagnetic metal with a pinkish tinge
- High electrical resistance and thermal conductivity
- Can form distinctive and beautiful hopper crystals
- Used in making alloys, solders, ceramic glazes, and fishing sinkers
Note: As the input did not provide technical specifications like material or other measurable aspects, the output only includes the information provided and does not include any false or misleading information.
Product Specifications:
Product Name | Bismuth Pellets (Pack Of 10) |
Material | Bismuth |
Purity | 99.99% |
Weight | Each Pellet Is 10 Grams |
Physical Properties | White, Crystalline, Brittle Metal With A Pinkish Tinge. Most Diamagnetic Of All Metals. Thermal Conductivity Is Lower Than Any Metal, Except Mercury. High Electrical Resistance. Highest Hall Effect Of Any Metal (I.E., Greatest Increase In Electrical Resistance When Placed In A Magnetic Field). High-Purity Bismuth Can Form Into Distinctive And Beautiful Hopper Crystals. |
Uses | Making Bismuth Alloys, Solders, Science Experiments Involving Magnet Levitation, Ceramic Glazes, Fishing Sinkers, Making Bismuth Compounds, And Casting Of Bismuth Products. |
Similar Products
- Bismuth Powder (99.99% Pure) - Ideal for Making Alloys, Solders, and Ceramic Glazes
- Bismuth Shot (5 lbs) - Perfect for Making Fishing Sinkers and Casting Bismuth Products
- Bismuth Crystal Growing Kit - Great for Science Experiments Involving Magnet Levitation and Crystal Formation
- Bismuth Oxide (99.9% Pure) - Used for Making Bismuth Compounds and Ceramic Glazes
- Bismuth Nugget (99.99% Pure) - A Unique Addition to Your Collection of Metals and Crafting Projects
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution: Handle Bismuth pellets with care as they are a brittle metal and can break easily. Avoid inhaling or ingesting the pellets as they may cause harm to your health. Keep them away from children and pets. Do not use Bismuth pellets for any purpose other than those specified in the product description.
Perfect for:
- Science enthusiasts and hobbyists
- Chemistry students and teachers
- Metal collectors and enthusiasts
- Artists and craftsmen
- Manufacturers and industrial users
- Fishing enthusiasts and tackle makers
Brass Metal Electrodes
These high purity brass electrodes are made of an alloy of copper and zinc and are stamped with letters "BS" for easy identification. They are perfect for science experiments studying the physical and chemical properties of brass alloy. Each brass electrode sheet is a valuable addition to your collection of metals. Please note that metal electrodes have sharp edges, so use caution when handling them.
Product Specifications
Material | High purity brass |
Dimensions | 19mm x 125mm (3/4 x 5 inches) |
Composition | About 65% copper and 35% zinc |
Identification Code | Stamped with "BS" |
Caution | Metal electrodes have sharp edges. |
These brass metal electrodes are a must-have for any science experiment studying the physical and chemical properties of brass alloy. With their high purity and easy identification code, they are a valuable addition to any collection of metals. However, please use caution when handling them as metal electrodes have sharp edges. Get your hands on these brass electrodes today and take your experiments to the next level!
Similar Products
- Copper Electrodes
- Zinc Electrodes
- Brass Rods
- Brass Sheets
- Brass Alloys
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for:
- Science teachers
- Students conducting experiments on brass alloys
- Chemistry enthusiasts
- Metal collectors
Bronze Metal Plates for Science Experiments
Explore the properties of bronze using these bronze metal plates. These metal plates are perfect for welding and soldering experiments, and for learning about the physical and chemical properties of bronze. A single metal strip can be used as an electrode for assembling voltaic cells or in various other chemical or electricity experiments. Each metal strip measures 125 x 20mm and is stamped with a 2-letter code (BZ) to identify the metal.
Product Specifications:
Dimensions | 125 x 20mm (L x W) |
Composition | 90% Copper and 10% Tin |
Identification Code | Stamped with "BZ" |
CAUTION: | Metal electrodes have sharp edges |
Similar Products
- Brass Metal Plate
- Copper Metal Plate
- Tin Metal Plate
- Aluminum Metal Plate
- Steel Metal Plate
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Explore the Physical and Chemical Properties of Metals with these Metal Plates
CAUTION: Metal electrodes have sharp edges
Perfect for:
- Science teachers and students
- Chemistry and physics enthusiasts
- Welding and soldering hobbyists
- Collectors of metals
Key Features:
- High purity bronze alloy of copper and tin
- Stamped with letters "BZ" for easy identification
- Perfect for science experiments and studying the physical and chemical properties of bronze alloy
- Valuable addition to your collection of metals
- Each metal strip measures 125 x 20mm
- Can be used as an electrode for assembling voltaic cells or in various other chemical or electricity experiments
Bronze Powder, Filter Grade 25 Powder
Bronze Powder, Filter Grade 25 Powder, or Bz25P, is a spherical particle bronze developed to satisfy the needs of the high reliability metallic filter market. This material is fully alloyed and has a closely controlled particle size range of -200+325. It is adaptable to an expanding range of applications, including resin-bonded friction components, decorative applications (including cold casting), welding and brazing, diamond tooling, surface engineering, steel-backed bearings (bi-metal strip), filters, bronze-filled PTFE for hydraulic seals, and more.
Key Features:
- High reliability for metallic filter market
- Fully alloyed bronze powder
- Closely controlled particle size range of -200+325
- Adaptable to expanding range of applications
- Suitable for resin-bonded friction components, decorative applications, welding and brazing, diamond tooling, surface engineering, steel-backed bearings, filters, and bronze-filled PTFE for hydraulic seals
Product Specifications:
Product Name | Bronze Powder, Filter Grade 25 Powder |
Material | Bronze |
Particle Size Range | -200+325 |
Applications | Resin-Bonded Friction Components, Decorative Applications (Including Cold Casting), Welding And Brazing, Diamond Tooling, Surface Engineering, Steel-Backed Bearings (Bi-Metal Strip), Filters, Bronze-Filled Ptfe For Hydraulic Seals, Etc. |
Special Features | Fully alloyed and has a closely controlled particle size range, adaptable to an expanding range of applications, developed to satisfy the needs of the high reliability metallic filter market |
Similar Products
- Bronze Powder, Filter Grade 50 Powder
- Aluminum Powder, Filter Grade 25 Powder
- Copper Powder, Filter Grade 25 Powder
- Iron Powder, Filter Grade 25 Powder
- Stainless Steel Powder, Filter Grade 25 Powder
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution: This product may pose a hazard if not handled properly. Please follow all safety guidelines and use appropriate protective equipment when working with Bronze Powder, Filter Grade 25 Powder, or any other bronze materials.
Perfect For:
- Manufacturers of high reliability metallic filters
- Companies in the resin-bonded friction component industry
- Decorative product manufacturers (including cold casting)
- Welding and brazing companies
- Diamond tooling manufacturers
- Companies in the surface engineering industry
- Manufacturers of steel-backed bearings (bi-metal strip)
- Companies in the filter manufacturing industry
- Manufacturers of bronze-filled PTFE for hydraulic seals
Bronze Powder, Filter Grade 40 Powder
Bronze Powder, Filter Grade 40 Powder, also known as Filter Bronze Powder or Filter Grade 40 Bz40P, is a highly reliable, spherical particle bronze developed to meet the demands of the metallic filter market. Its fully alloyed composition and closely controlled particle size range of -100+230 make it adaptable to a wide range of applications, including resin-bonded friction components, decorative applications, welding and brazing, diamond tooling, surface engineering, and more. This material is also used in the production of steel-backed bearings, bi-metal strips, filters, and bronze-filled PTFE for hydraulic seals. With its versatility and quality, Bronze Powder, Filter Grade 40 Powder is a top choice for professionals in various industries.
Key Features:
- Filter Grade 40 Powder
- Fully alloyed
- Closely controlled particle size range of -100+230
- Adaptable to an expanding range of applications
- Spherical particle bronze
- High reliability for metallic filter market
Product Specifications:
Product Name | Bronze Powder, Filter Grade 40 Powder |
Material | Bronze |
Particle Size Range | -100+230 |
Applications | Resin-Bonded Friction Components, Decorative Applications (Including Cold Casting), Welding And Brazing, Diamond Tooling, Surface Engineering, Steel-Backed Bearings (Bi-Metal Strip), Filters, Bronze-Filled Ptfe For Hydraulic Seals, Etc. |
Additional Features | Fully alloyed, closely controlled particle size range |
Similar Products
- Bronze Alloy Powder
- Filter Grade 30 Powder
- Decorative Bronze Powder
- Bronze Welding Rods
- Bronze-Filled PTFE Sheets
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution: This product may pose a hazard if inhaled or ingested. Use appropriate protective equipment and handle with care.
Perfect for:
- Manufacturers in the high reliability metallic filter market
- Manufacturers of resin-bonded friction components
- Manufacturers of decorative applications (including cold casting)
- Manufacturers of welding and brazing materials
- Manufacturers of diamond tooling
- Manufacturers of steel-backed bearings (bi-metal strip)
- Manufacturers of filters
- Manufacturers of bronze-filled PTFE for hydraulic seals
Bronze Powder
Bronze Powder is a dark, spherical powder that has a wide range of applications. It is especially useful in specialized applications such as flame-spraying, brazing, strip-bearings, metal-bonded grinding wheels and cutting tools, and metal filled plastics for bearings, decorative, conductive, metal injection molding (MIM) and high strength applications. This prealloyed high density spherical bronze powder is developed to meet the specific needs of these applications.
Bronze powder is also used in resin-bonded friction components, decorative applications (including cold casting), welding and brazing, diamond tooling, surface engineering, steel-backed bearings (bi-metal strip), filters, bronze-filled PTFE for hydraulic seals, and more. Its versatility makes it a popular choice in many industries.
Key Features:
- Bronze Powder
- Spherical shape
- Dark powder
- Developed for specialized applications such as flame-spraying, brazing, strip-bearings, metal-bonded grinding wheels and cutting tools, metal filled plastics for bearings, decorative, conductive, metal injection molding (MIM) and high strength applications
- Used in resin-bonded friction components, decorative applications (including cold casting), welding and brazing, diamond tooling, surface engineering, steel-backed bearings (bi-metal strip), filters, bronze-filled PTFE for hydraulic seals, etc.
- Prealloyed high density spherical bronze powder
Emphasized Unique Selling Points: - Developed for specialized applications - Can be used in a wide range of industries and products - Prealloyed high density spherical bronze powder
Product Specifications:
Product Name: | Bronze Powder |
Shape: | Spherical |
Color: | Dark |
Material: | Bronze |
Applications: | Flame-spraying, brazing, strip-bearings, metal-bonded grinding wheels and cutting tools, metal filled plastics for bearings, decorative, conductive, metal injection molding (MIM) and high strength applications, resin-bonded friction components, decorative applications (including cold casting), welding and brazing, diamond tooling, surface engineering, steel-backed bearings (bi-metal strip), filters, bronze-filled PTFE for hydraulic seals, etc. |
Density: | Prealloyed high density spherical bronze powder |
Similar Products
- Dark Bronze Powder
- Spherical Copper Powder
- Prealloyed High Density Spherical Copper Powder
- Flame-Spraying Bronze Powder
- Bronze-Filled PTFE for Hydraulic Seals
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: Bronze Powder may be hazardous if not handled properly. Please follow all safety precautions and instructions provided by the manufacturer before use.
Perfect for:
- Manufacturers of flame-spraying, brazing, strip-bearings, metal-bonded grinding wheels, and cutting tools
- Producers of metal filled plastics for bearings, decorative, conductive, metal injection molding (MIM), and high strength applications
- Resin-bonded friction component manufacturers
- Producers of cold casting decorative applications
- Welding and brazing professionals
- Diamond tooling manufacturers
- Hydraulic seal producers using bronze-filled PTFE
Perfect For: Manufacturers and producers of specialized applications and professionals in welding, brazing, diamond tooling, and hydraulic seal production.
Prealloyed High Density Spherical Bronze Powder
High density bronze powder for specialized applications.
General Information
The Prealloyed High Density Spherical Bronze Powder is developed for specialized applications, including flame-spraying, brazing, strip-bearings, metal-bonded grinding wheels and cutting tools, and metal filled plastics for bearings, decorative, conductive, metal injection molding (MIM) and high strength applications. Bronze powder is also used in resin-bonded friction components, decorative applications (including cold casting), welding and brazing, diamond tooling, surface engineering, steel-backed bearings (bi-metal strip), filters, bronze-filled PTFE for hydraulic seals, etc.
Key Features
- Prealloyed high density bronze powder
- Developed for specialized applications
- Spherical particle shape
- Chemical composition: copper (89.7%), tin (10%), and phosphorous (0.3%)
- Apparent density: 5 g/cc
- Sieve analysis (% weight): 100 mesh (0%), -100/140 (0%), -140/200 (0.1%), -200/325 (2.8%), -325 (97.1%)
Similar Products
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
- Prealloyed Bronze Powder - Spherical Shape, High Density
- High Strength Bronze Powder - Prealloyed, Spherical Shape
- Prealloyed Bronze Powder for Metal Injection Molding
- Specialized Bronze Powder for Brazing and Flame-Spraying
- Decorative Bronze Powder - Spherical Shape, High Purity
Cautions/Warnings
No cautions or warnings provided.
Product Specifications
Chemical Composition: | Copper (89.7%), Tin (10%), and Phosphorous (0.3%) |
Apparent Density: | 5 g/cc |
Sieve Analysis: | 100 Mesh (0%), -100/140 (0%), -140/200 (0.1%), -200/325 (2.8%), -325 (97.1%) |
Particle Shape: | Spherical |
Carbon Electrodes (Graphite)
Carbon electrodes, also known as graphite electrodes, are blocks of high-purity carbon used for scientific experiments such as assembling voltaic cells and electrolysis. Graphite is also commonly used for electrical and electronic experiments due to its excellent electrical conductivity and thermal stability. Each electrode measures 125 x 25 x 5mm and has a smooth surface, making it safe and easy to handle during experiments.
General Information
High-purity carbon electrodes are essential for scientific and electrical experiments, and the Carbon Electrodes (Graphite) are perfect for those looking for a reliable and efficient option. These electrodes are commonly used for assembling voltaic cells and electrolysis experiments, thanks to their excellent electrical conductivity and thermal stability. They are also known as graphite electrodes and are frequently used for electrical and electronic experiments. If you're looking for a high-quality carbon electrode, the Carbon Electrodes (Graphite) are an excellent choice.
Product Specifications
Material | Carbon (Graphite) |
Dimensions | 125 x 25 x 5mm |
Similar Products
- Flat Electrode (Graphite)
- Carbon Carbon Electrode
- Graphite Rod Electrode
- Graphite Plate Electrode
- High-Purity Graphite Electrode
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: Handle with care during experiments. Keep away from flammable materials.
Perfect for:
- Scientists conducting experiments with voltaic cells and electrolysis
- Electrical and electronic experiment enthusiasts
Key Features:
- High-purity carbon material
- Used for assembling voltaic cells and electrolysis experiments
- Excellent electrical conductivity and thermal stability
- Also known as graphite electrodes for electrical and electronic experiments
CIPMS (Carbonyl Iron Powder/ Zero Valent Iron powder microspheres)
General Information
CIPMS is a high-purity iron microsphere product made from Carbonyl Iron Powder and Zero Valent Iron powder. The microspheres range in size from 3 to 10 microns, and are manufactured using special technology that ensures a purity of 99.5% or greater.
Key Features
- High-purity iron microspheres
- Outstanding magnetization behavior
- Applications include metal injection molding, inductive electronic components, microwave absorption, magnetic ink, and magnetic plastic parts
- Limited Quantity Product
Product Specifications
Fe | 97.8% - 99.5% |
---|---|
C max | 0.75-0.90% |
N max | 0.65-0.90% |
O max | 0.15 - 0.40% |
d10 | 1.7 - 2.7 Micron |
d50 | 3.9 - 5.2 Micron |
d90 | 7.2 - 9.2 Micron |
Similar Products
- Nano Iron Powder
- Iron Oxide Powder
- Electrolytic Iron Powder
- Atomized Iron Powder
- Micron Iron Powder
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Cast Iron Powder
Cast iron powder is a finely ground material with a high metallic iron content of 90%, making it ideal for various industrial applications. Its primary use is in the production of specialty alloys, where it contributes to the development of robust and durable materials. Additionally, it serves as a key ingredient in pyrotechnic mixtures, adding critical properties for controlled combustion. The powder is finely granulated, with up to 95-100% passing through a 20-mesh sieve, ensuring a consistent particle size. With minimal impurities such as low levels of manganese, silicon, and chromium, this product offers high purity for demanding manufacturing processes.
Key Features
- 90% metallic iron content
- Used in specialty alloys manufacturing
- Ingredient in pyrotechnic mixtures
- Fine granulation: 95-100% passing 20 mesh
- Low levels of impurities: manganese, silicon, chromium
- Ideal for industrial and chemical processes
Product Specifications:
Metallic Iron | 90% |
Total Carbon | 2.85% |
Manganese | <1.0% |
Silicon | <3.0% |
Chromium | <1.0% |
Granulation - Passing 20 mesh | 95-100% |
Granulation - Passing 100 mesh | 1% Max. |
Perfect for metalworking industries, alloy manufacturers, pyrotechnic suppliers, foundry operators, and chemical industries.
Graphite Cast Iron Dust Blend
Graphite Cast Iron Dust Blend is a unique combination of cast iron dust and graphite blend that is used in various industrial applications. This product is created by blending high-quality cast iron dust with graphite, resulting in a material that has excellent thermal conductivity, high strength, and good wear resistance. Graphite Cast Iron Dust Blend is widely used in the manufacturing of brake pads, clutch plates, and other automotive components. Its unique properties make it an ideal choice for applications that require high strength and durability.
Product Specifications:
Product Name | Cast Iron Dust, Blend With Graphite |
Material | Cast Iron and Graphite |
Particle Size | Varies |
Density | Varies |
Color | Dark grey/black |
Application | Foundry industry, metal casting |
Packaging | Bags or bulk |
Perfect For:
- Foundries and metalworking industries
- Manufacturers of cast iron products
- Companies looking for improved casting quality
- Engineering firms specializing in metal alloys
- Industrial product distributors
- Metalworking enthusiasts and hobbyists
Cast Iron Powder, Thermal Spray
Cast Iron Powder, Thermal Spray is a high-quality powder that is designed for use in thermal spray applications. This powder is made from cast iron, which gives it excellent wear resistance and durability. It is commonly used in the aerospace, automotive, and industrial sectors, where it is used to protect surfaces from wear and corrosion. The powder is also used to build up worn or damaged parts, extending their lifespan and reducing the need for expensive replacements. With its exceptional properties and versatility, Cast Iron Powder, Thermal Spray is an essential component in many industries and applications.
Key Features:
- Made of high-quality cast iron powder
- Designed for thermal spray applications
- Provides excellent thermal conductivity
- Produces durable and long-lasting coatings
- Easy to apply and versatile in use
- Cost-effective solution for various industrial needs
Product Specifications:
Product Analysis: | ||
Metallic Iron: | >90% | |
Total Carbon: | 2.85% | |
Manganese: | <1.0% | |
Silicon: | <3.0% | |
Chromium: | <1.0% | |
Granulation | ||
Passing 20 mesh: | 95-100% | |
Passing 100 mesh: | 1% Max. |
Similar Products
- Steel Powder, Thermal Spray
- Aluminum Powder, Thermal Spray
- Copper Powder, Thermal Spray
- Brass Powder, Thermal Spray
- Zinc Powder, Thermal Spray
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: This product may contain hazardous materials. Please handle with care and follow all safety protocols. Use protective equipment as necessary.
Perfect for:
- Industrial manufacturers and engineers in need of high-quality, durable cast iron coatings for their products
- Metalworking professionals looking for a reliable and efficient thermal spray powder for their projects
- Automotive and aerospace industries seeking superior thermal barrier coatings for their equipment and components
- Maintenance and repair professionals requiring effective solutions for restoring worn or damaged cast iron surfaces
- Research and development teams exploring new applications and uses for cast iron powder and thermal spray technology
- Anyone looking for a versatile and cost-effective solution for improving the performance and longevity of metal surfaces
Chromium(III) Oxide (Chromic Oxide)
Chromium(III) oxide also known as Chromic Oxide is the inorganic compound of the formula Cr2O3. It is one of the principal oxides of chromium and is used as a green pigment. Because of its considerable stability, chromic oxide is a commonly used pigment and was originally called viridian. It is used in paints, inks, and glasses. Chromic Oxide is also an important ceramic glaze.
When used as glaze, Chrome produces a wide range of greens, from a transparent glossy lime green to the more iconic, opaque, satin kelly green. The strong green color can often be modified by very small amounts of other oxides, like cobalt oxide, copper oxide, iron oxide, manganese dioxide, rutile, tin oxide, etc. In addition to green, chrome oxide also produces gray, brown, red, pink, and orange colors. It is also used in black glazes and stains to give a strong, true black color.
Average particle size: 8 Micron
Mainly used for smelting metal chromium and chromium carbide. Used for enamel and ceramic glaze. Artificial leather, building material stain. Used in the manufacture of fast coating, abrasive material, green polishing paste printing money and special ink. Used for organic synthesis catalyst. Is advanced green pigment. They are also used as catalyst, analytical reagent.
VIEW SAFETY DATA SHEET: Chromic Oxide
High-Quality Pigment for Various Applications
- For Paints, Inks, and Ceramics
- Versatile Color Modifier
- Stable and Reliable
- Achieve Vibrant Greens
- Used in Black Glazes
Additional Description
Chrome Oxide | Cr2O3 | 99.24% |
Moisture | 0.03% | |
Aluminum | Al | 0.063% |
Calcium | Ca | 0.009% |
Carbon | C | 0.017% |
Chromium (Metalic) | Cr | 0.004 |
Chromium (Herxavalent) | Cr 6 | <0.0001% |
Iron | Fe | 0.051% |
Magnesium | Mg | 0.001% |
Phosphorus | P | <0.001 |
Silicon | Si | 0.011% |
Sodium | Na | 0.008% |
Sulfur | S | 0.008% |
Vanadium | V | 0.008% |
Similar Products
- High-Quality Pigment for Ceramics
- Green Pigment for Enamel
- Industrial Chromium Oxide Powder
- Premium Green Paint Pigment
- Versatile Oxide for Coloration
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for Ceramic Artists, Paint Manufacturers, Ink Production, Enamel and Glass Makers, and Industrial Coating Producers.
Coarse Steel Powder Mesh 100 (IP100M) MicroShield
Coarse Steel Powder Mesh 100 (IP100M) is a high-grade iron-steel powder ideal for various industrial and scientific applications. This powder is widely used for wildlife control, soil fortification, concrete and sculpture reinforcement, and scientific experiments where magnetic properties or iron supplementation are required. Imported for quality, it provides versatile solutions for projects requiring precision and reliable performance. Some minor contamination may be present due to repackaging from damaged bags, making it suitable for applications where ultra-high purity is not a priority but robust functionality is essential.
Key Features
- High-grade Mesh 100 coarse steel powder for diverse applications.
- Useful in soil enrichment, concrete, wildlife control, and sculpture.
- Contains essential elements: carbon, manganese, silicon, sulfur, and phosphorous.
- Available in bulk orders with competitive rates for 3000 lbs or more.
- Some minor contamination may occur due to repackaging.
Product Specifications
Chemical Composition | Range |
Carbon | 0.8% - 1.2% |
Manganese | 0.35% - 1.2% |
Silicon | 0.4% Minimum |
Sulfur | 0.05% Maximum |
Phosphorous | 0.05% Maximum |
Perfect for wildlife control professionals, agricultural specialists, concrete artists, science educators, and industrial buyers.
Cobalt (II, III) Oxide
Cobalt (II, III) Oxide is a chemical compound that is commonly used as a catalyst in various chemical reactions. This compound is a black powder that is insoluble in water but soluble in acids. Cobalt (II, III) Oxide has a wide range of applications, including in the production of ceramics, glass, and pigments. It is also used in the manufacturing of rechargeable batteries, as well as in the production of magnetic recording media. This versatile compound has a fascinating history, having been discovered in the early 19th century by Swedish chemist Georg Brandt. Today, Cobalt (II, III) Oxide continues to be an important and widely used chemical compound in various industries around the world.
Product Specifications:
Product Name | Cobalt (II, III) Oxide |
Chemical Formula | CoO.Co2O3 |
CAS Number | 1308-06-1 |
Appearance | Black powder |
Molecular Weight | 240.80 g/mol |
Melting Point | 895 ?C (1,643 ?F; 1,168 K) |
Density | 6.45 g/cm3 |
Similar Products
- Cobalt Oxide Powder
- Cobalt Carbonate
- Cobalt Nitrate
- Cobalt Acetate
- Cobalt Sulfate
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution: Cobalt (II, III) Oxide may be hazardous. Use appropriate safety measures when handling.
CUFLAT Copper Electrodes
High-purity copper electrodes, perfect for diverse scientific experiments and educational use. Essential for demonstrations in physics and chemistry.
Key Features
- 99.9% pure copper
- Flat design for easy use
- Stamped with "Cu" for identification
- Versatile in various experiments
- Valuable addition to metal collections
Product Specifications
Material | Copper (Cu) |
Purity | 99.9% |
Shape | Flat - 19mm x 125mm, (3/4 x 5 inches) |
Identification | Stamped "Cu" |
Applications | Science experiments, education |
Similar Products
Similar to CUSHEET.
H.S. Code: 7409.11.5050
(Refined Copper Plates, Sheet And Strip, In Coils, Under 5mm Thick And under 500mm Wide)- High-purity zinc electrodes, flat
- Stamped aluminum electrodes, versatile
- Flat brass electrodes for experiments
- Pure silver electrodes, stamped "Ag"
- Flat iron electrodes, high purity
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: Metal electrodes have sharp edges.
Perfect for Science Educators, Laboratory Technicians, and Experiment Enthusiasts
Copper Filings
Highly pure (>99%) electrolytic copper in a granular form, Copper Filings are versatile for various industrial, chemical, and artistic applications. Mesh 25 - 325 suitable for electrical and thermal conductivities.
Key Features
- Highly pure electrolytic copper
- Excellent electrical and thermal conductivities
- Versatile mesh size from 25 - 325
- Useful in a wide range of applications
- Effective for coatings, brazing, and soldering
Product Specifications
Material | Copper >99% Purity |
Mesh Size | 25 - 325 |
Form | Granular Mixed Grain |
Applications | Electrical, Mechanical, Decorative |
Similar Products
- High conductivity copper mesh
- Electrical grade copper pellets
- Thermal conductive copper strips
- Fine copper powder for coating
- Brazing grade copper granules
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for Electrical Engineers, Industrial Manufacturers, Artists and Craftsmen, Chemical Technicians, Medical Equipment Manufacturers
CU12HP Copper Granules
Coarse copper powder is made of solid metalic high purity copper metal. Particles are almost in equal size with appearance of metalic spherical crystals.
Recomended for wood inlay, art and industrial applications where solid round multi-side balls may be used.
CAS No.: 7440-50-8
Note: Pure copper powders do not show continuity or conductivity when tested with a multimeter. This might be due to two reasons. One reason is the low voltage used for the test. The other reason is the presence of air and weak contacts between the particles. They will exhibit conductivity with higher voltage, when compacted, and when mixed with some oil or resin to form a paste.
Safety Data Sheet for Copper Powder
Key Features
- High purity solid copper
- Coarse, 10 mesh size
- Metallic spherical crystals
- Versatile for wood inlays and art
- Uniform particle size distribution
Product Specifications
Material | Solid Metallic Copper |
Mesh Size | 10 Mesh |
Appearance | Metallic Spherical Crystals |
Applications | Wood Inlay, Art, Industrial |
CAS Number | 7440-50-8 |
Similar Products
- Bronze spherical powder, artistic use
- Silver fine granules, jewelry inlay
- Aluminum coarse powder, industrial grade
- Brass micro pellets, precision casting
- Iron filings, metallic craft supplies
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for artisans, woodworkers, industrial manufacturers, jewelers, and artists
fety Data Sheet for Copper Powder
CU23HP, Copper Granules, Mesh 20 (Coarse Copper Powder)
OUT OF STOCK
REPLACEMENT OPTIONS
CU12HP | CU35HP |
Coarse copper powder, CU23HP, is a top-tier metallic material made of solid, high-purity copper metal. The particles are uniform, resembling metallic spherical crystals. This powder is perfect for wood inlay, art, and industrial applications, where its purity and consistency enhance product quality. Copper content stands at 99.84% with an apparent density of 5.29 g/cc, ensuring a high standard for various uses.
In laboratories, granular copper is used in removal of Sulfur from Environmental Samples.
Key Features
- High-purity copper content (99.84%)
- Uniform spherical metallic crystals
- Ideal for wood inlay and artistic applications
- Consistent particle size (-20/ 30 mesh), (Granules are about 0.75 mm in diameter)
- Apparent density of 5.29 g/cc
Product Specifications
Copper Content | 99.84% |
Apparent Density | 5.29 g/cc |
Sieve Analysis - 20 Mesh | 0% |
Sieve Analysis - -20/ 30 Mesh | 100% |
Sieve Analysis - -30/ 40 Mesh | 0.0% |
Sieve Analysis - -40 Mesh | 0.0% |
Similar Products
- Fine copper powder for metallurgy
- Brass granules for decorative inlay
- Bronze powder for sculpture casting
- Silver powder for artistic applications
- Aluminum granules for industrial use
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for artists, woodworkers, industrial material scientists, metalworking professionals, and decorative inlay craftsmen
CU35HP Copper Granules
Coarse copper powder is made of solid metallic high purity copper metal. Particles are almost in equal size with appearance of metallic spherical crystals.
Recommended for wood inlay, art and industrial applications where solid round multi-side balls may be used.
In laboratories, granular copper is used in removal of Sulfur from Environmental Samples.
CAS No.: 7440-50-8
Note: Pure copper powders do not show continuity or conductivity when tested with a multimeter. This might be due to two reasons. One reason is the low voltage used for the test. The other reason is the presence of air and weak contacts between the particles. They will exhibit conductivity with higher voltage, when compacted, and when mixed with some oil or resin to form a paste.
Safety Data Sheet for Copper Powder
Key Features
- High purity solid copper
- Coarse, 35 mesh size (Granules are about 0.5-mm in diameter)
- Metallic spherical crystals
- Versatile for wood inlays and art
- Uniform particle size distribution
Product Specifications
Material | Solid Metallic Copper |
Mesh Size | 35 Mesh |
Appearance | Metallic Spherical Crystals |
Applications | Wood Inlay, Art, Industrial |
CAS Number | 7440-50-8 |
Similar Products
- Bronze spherical powder, artistic use
- Silver fine granules, jewelry inlay
- Aluminum coarse powder, industrial grade
- Brass micro pellets, precision casting
- Iron filings, metallic craft supplies
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for artisans, woodworkers, industrial manufacturers, jewelers, and artists
CU279 Copper Powder 99 %, Mesh 200
CU279 Copper Powder 99 % Mesh 200 is a premium copper powder known for its high purity and unique properties. Produced through a water atomization process, it has irregular particles and clusters, offering a lower density. This powder is essential in various industries for its purity and conductivity, serving in applications like diamond wheel fabrication, sintering, and chemical reactions. It's also utilized in making conductive inks, paints, pastes, and as an element in thermal management systems.
Key Features
- High purity level of 99.3%
- Irregular particle shape for versatile applications
- Water-atomized and hydrogen-reduced
- Applicable in conductive inks and thermal management
- Effective in sintering and diamond wheel fabrication
Product Specifications
Copper Purity | 99.3% |
Hydrogen Loss | 0.39% |
Apparent Density | 2.6 - 2.8 g/cc |
Sieve Analysis | 100 MESH: Trace 140 MESH: 1% Max 200 MESH: 3% Max 325 MESH: Balance -325 MESH: 90% Min |
Similar Products
- Fine iron powder, water-atomized, hydrogen-reduced
- Atomized aluminum, high-purity, mesh 200
- Nickel powder, irregular particles, conductive
- Brass powder, atomized, sintering applications
- Bronze powder, spherical, thermal uses
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for Industrial Manufacturers, Chemical Engineers, Metal Fabricators, Research Laboratories, Electronics Manufacturers
- Thick and Thin Film pastes
- Conductive Inks, paints and pastes
- Injection Molding
- Thermal management
- EDM Electrodes
- Antifouling Paint
- Thermal Sprays
- Sintered alloys/ products
- Brazing/ soldering paste
CU165: Copper Powder 99.3%, 150 Mesh
The most popular and widely used copper powder, produced by water atomization method followed by hydrogen reduction. Applications include production of copper compounds, catalyst in chemical formulations, abrasive wheels, carbon brushes, and more.
HTS Code: 7406.10.0000
NMFC: 30743
CAS: 7440-50-8
Note: Pure copper powders do not show continuity or conductivity when tested with a multimeter. This might be due to two reasons. One reason is the low voltage used for the test. The other reason is the presence of air and weak contacts between the particles. They will exhibit conductivity with higher voltage, when compacted, and when mixed with some oil or resin to form a paste.
Safety Data Sheet for Copper Powder
Key Features
- 99.3% pure copper
- Water atomized and hydrogen reduced
- Fine mesh for versatile use
- Suitable for a range of industrial applications
- Enhanced conductivity under specific conditions
Product Specifications
Purity | 99.3% |
Apparent Density | 2.7 g/cc |
Nominal Mesh | -140 -325 mesh ratio > 50% |
Applications | General purpose, brazing, chemical, electronics, etc. |
Conductivity Note | Conductive under high voltage or when mixed with oil/resin |
Similar Products
- High-purity, fine-grain, silver powder
- Atomized aluminum powder, 99% purity
- Bronze powder, water-atomized, industrial grade
- Nickel powder, 99.5% pure, chemical applications
- Zinc dust, fine mesh, high purity
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for industrial manufacturers, chemical processing companies, electronics producers, automotive parts manufacturers, and research and development laboratories.
Copper Powder CU155A-CU112SP
Very high purity, air atomized, hydrogen reduced ultra fine copper powder. Spherical particle. High conductivity. High Density.
HTS Code: 7406.10.0000
NMFC: 30743
CAS: 7440-50-8
New product code is CU112SP
Note: Pure copper powders do not show continuity or conductivity when tested with a multimeter. This might be due to two reasons. One reason is the low voltage used for the test. The other reason is the presence of air and weak contacts between the particles. They will exhibit conductivity with higher voltage, when compacted, and when mixed with some oil or resin to form a paste.
Safety Data Sheet for Copper Powder
Key Features
- 99.5% - 99.9% purity level
- Spherical particle shape
- High conductivity and density
- Suitable for various industrial applications
- Consistent sieve analysis
Product Specifications
Copper Content | 99.81% |
Iron Content | 0.01% |
Hydrogen Loss | 0.18% |
Apparent Density | 4.89 g/cc |
Typical Analysis | Copper: 99.81% Iron: 0.01% Hydrogen Loss: 0.18% Apparent Density: 4.89 g/cc SIEVE ANALYSIS 200 MESH: 0% -200 325 MESH: 4.8% -325 MESH: 95.2% |
Similar Products
- Fine spherical aluminum powder, high purity
- Ultra fine nickel powder, spherical, conductive
- Atomized bronze powder, high density, fine particle
- Spherical zinc powder, high conductivity, ultra fine
- Fine silver powder, high purity, conductive particles
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for Electronics Manufacturers, Industrial Chemists, Thermal Management Engineers, Brazing Professionals, Research and Development Teams
Recommended for:
- Thick and Thin Film pastes
- Capacitor Chips
- End cap Terminators
- Conductive Inks, paints and pastes
- Injection Molding
- Electronics
- Thermal management
- EDM Electrodes
- Thermal Sprays
- Sintered alloys/ products
- Brazing/ soldering paste
Copper Powder
Copper powder, high purity, water atomized, hydrogen reduced ultra fine copper powder with spheroidal particles and clusters. Higher conductivity. Lower Density.
May be used for metal injection molding as well as other applications were the conductivity and purity of product is important.
HTS Code: 7406.10.0000
NMFC: 30743
CAS: 7440-50-8
Recommended for:
- Thick and Thin Film pastes
- Conductive Inks, paints and pastes
- Injection Molding
- Thermal management
- EDM Electrodes
- Antifouling Paint
- Thermal Sprays
- Sintered alloys/ products
- Brazing/ soldering paste
Typical Analysis:
Copper: 99.31%
Hydrogen Loss: 0.39%
Apparent Density: 2.97 g/cc
SIEVE ANALYSIS
60 MESH: 0%
-60/ 80 MESH: 0%
-80/ 100 MESH: 0%
-100/ 140 MESH: TR
-140/ 200 MESH: TR
-200/ 325 MESH: 0.6%
-325 MESH: 99.4%
Note: Pure copper powders do not show continuity or conductivity by a multimeter. I think there are two reasons for that. One is the low voltage used for the test. The other is lots of air and weak contacts between the particles. They will show conductivity with higher voltage, when they are compacted and when they are mixed with some oil or resin to form a paste.
CU301-E: Copper Powder 99.8%
Safety Data Sheet for Copper Powder
Electronic grade Copper powder, high purity, water attomized, hydrogen reduced ultra fine copper powder with spheroidal particles. Higher conductivity. Lower Density.
May be used for metal injection molding as well as other applications were the conductivity of product is important.
HTS Code: 7406.10.0000
NMFC: 30743
CAS: 7440-50-8
Note: Pure copper powders do not show continuity or conductivity by a multimeter. I think there are two reasons for that. One is the low voltage used for the test. The other is lots of air and weak contacts between the particles. They will show conductivity with higher voltage, when they are compacted and when they are mixed with some oil or resin to form a paste.
Key Features
- 99.8% pure copper
- Ultra-fine, spheroidal particles
- High conductivity and lower density
- Suitable for metal injection molding
- Effective in electronic applications
Product Specifications
Purity | 99.85% |
Particle Size | -325 Mesh |
Density | 2.97 g/cc |
Application | Metal Injection Molding, Electronics |
Typical Analysis: | Copper: 99.85% Hydrogen Loss: 0.19% Apparent Density: 2.97 g/cc SIEVE ANALYSIS 60 MESH: 0% -60/ 80 MESH: 0% -80/ 100 MESH: 0% -100/ 140 MESH: TR -140/ 200 MESH: TR -200/ 325 MESH: 0.6% -325 MESH: 99.4% |
Similar Products
- High purity, sintering silver powder
- Fine nickel powder, electronic applications
- Ultra-fine aluminum powder, high conductivity
- Spherical zinc powder, lower density
- Conductive graphene powder, versatile use
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for electronics manufacturers, R&D labs, and specialists in conductive materials.
Recommended for:
- Thick and Thin Film pastes
- Capacitor Chips
- End cap Terminators
- Conductive Inks, paints and pastes
- Injection Molding
- Electronics
- Thermal management
- EDM Electrodes
- Thermal Sprays
- Sintered alloys/ products
- Brazing/ soldering paste
CU264: Copper Powder, 99.5%, Mesh 100
High purity copper powder, nominal mesh 100, Apparent density: 2.6 g/cc, Copper > 99.5%, with irregular shape particles. Used in powder metallurgy. May be admixed with other metal powders and graphite for specific properties such as strength, hardness and wear resistance for structural parts.
HTS Code: 7406.10.0000
NMFC: 30743
CAS: 7440-50-8
Note: Pure copper powders do not show continuity or conductivity when tested with a multimeter. This might be due to two reasons. One reason is the low voltage used for the test. The other reason is the presence of air and weak contacts between the particles. They will exhibit conductivity with higher voltage, when compacted, and when mixed with some oil or resin to form a paste.
Safety Data Sheet for Copper Powder
Key Features
- High Purity Copper (>99.5%)
- Nominal Mesh 100 for fine granularity
- Irregular particle shape for diverse uses
- Compatible with other metals and graphite
- Conductivity with higher voltage or when compacted
Product Specifications
Apparent Density | 2.6 g/cc |
Purity | > 99.5% Copper |
Particle Shape | Irregular |
Conductivity | At higher voltages/when compacted |
Applications | Powder Metallurgy, Alloys |
Similar Products
- High purity bronze powder, metallurgy
- Fine granular aluminum powder, industrial
- Nickel powder, high density, 99% purity
- Spherical zinc powder, corrosion-resistant
- Iron powder, magnetic, for alloys
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for Metallurgists, Industrial Manufacturers, Material Scientists, Engineering Students, Research and Development Labs
CU118SP Copper Powder, Fine, Spherical
Our specification guarantees that at least 80% of this powder are particles smaller than 44 micron. A typical analysis however shows that 88% of particles are smaller than 44 micron. Most particles are between 16 micron and 28 micron.
Applications include cold casting, 3-D printer filaments, metal clay, sintering, Green/ blue patina and rust effect, preventing mold in concrete, plaster,dry-wall, paint, adhesives and grout.
Also used in 3D printing process known as Selective Powder Deposition (SPD)
Note: Pure copper powders do not show continuity or conductivity when tested with a multimeter. This might be due to two reasons. One reason is the low voltage used for the test. The other reason is the presence of air and weak contacts between the particles. They will exhibit conductivity with higher voltage, when compacted, and when mixed with some oil or resin to form a paste.
Safety Data Sheet for Copper Powder
Key Features:
- High-purity, high-density spherical copper powder
- Provides high heat conductivity and electrical conductivity
- Suitable for various applications, including cold casting, 3-D printer filaments, metal clay, sintering, green/blue patina and rust effect, preventing mold in concrete, plaster, dry-wall, paint, adhesives, and grout
- Used in the 3D printing process known as Selective Powder Deposition (SPD)
- Particle size distribution with 88% of particles smaller than 44 micron
Product Specifications:
Copper Purity | Over 99.5% |
Hydrogen Loss | Less than 0.7% |
Apparent Density | 4.5-5.5 g/cc |
Typical Analysis | Copper > 99.5% Hydrogen Loss < 0.7% Apparent Density, g/cc: 4.5 - 5.5 Passing mesh 325 (44 micron): 80% ~ 88% |
Similar Products:
- Ultra-Fine Copper Powder
- High-Purity Copper Foil
- Copper Wire
- Copper Rod
- Copper Sheet
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for enhanced conductivity and versatility applications, including cold casting, 3-D printing, metal clay, and more.
CU7005F Copper Powder
Copper Powder offers exceptional metallic shine, ideal for metallic inks and paints. Compatible with most resins and conductive for ink creation.
For more details, visit the CU7005F product data sheet.
Key Features
- Exceptional metallic shine
- Art-grade pigment quality
- Compatible with various resins
- Usable with drying oils like linseed
- Enables creation of conductive inks
Product Specifications
Type | Copper Powder |
Use | Metallic Inks, Paints |
Compatibility | Polyurethane, Polyacrylic, Polyester |
Conductivity | Suitable for Conductive Inks |
Pigment Quality | Art Grade |
Similar Products
- Metallic-shine gold powder for inks
- Silver pigment powder, art-grade
- Bronze powder, resin-compatible
- Reflective aluminum powder, versatile
- Artistic brass powder for painting
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for Artists, Paint Manufacturers, and DIY Craft Enthusiasts
Copper Powder CU112SP
CU112SP is a super fine, high density, high purity spherical copper powder that provides high heat conductivity and electrical conductivity properties to your products.
Our specification guarantees that at least 95% of this powder are particles smaller than 44 micron. A typical analysis however shows that 99.9% of particles are smaller than 44 micron. Most particles are between 10 micron and 22 micron.
HTS Code: 7406.10.0000
NMFC: 30743
CAS: 7440-50-8
Applications include cold casting, 3-D printer filaments, metal clay, sintering, Green/ blue patina and rust effect, preventing mold in concrete, plaster,dry-wall, paint, adhesives and grout.
Also used in 3D printing process known as Selective Powder Deposition (SPD)
Old product code: CU155A
Note: Pure copper powders do not show continuity or conductivity when tested with a multimeter. This might be due to two reasons. One reason is the low voltage used for the test. The other reason is the presence of air and weak contacts between the particles. They will exhibit conductivity with higher voltage, when compacted, and when mixed with some oil or resin to form a paste.
Safety Data Sheet for Copper Powder
Key Features
- Super fine, spherical particles
- High density and purity
- Excellent thermal and electrical conductivity
- Consistent particle size distribution
- Versatile applications in industry and art
Product Specifications
Particle Size | 95% < 44 microns |
Purity | > 99.2% Copper |
Apparent Density | 4.5 - 5.5 g/cc |
Hydrogen Loss | < 0.7% |
Mesh Passing | 99.9% through 325 (44 micron) |
Similar Products
- Fine silver powder, high conductivity
- Spherical bronze powder, 3D printing
- Fine aluminum powder, thermal conductivity
- High-purity zinc powder, corrosion resistance
- Spherical titanium powder, lightweight strength
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for 3D Printing Enthusiasts, Industrial Manufacturers, Electronics Professionals, Artists and Sculptors, Construction Material Suppliers
Highly pure (>99%) electrolytic copper in a granular form, Copper Filings are versatile for various industrial, chemical, and artistic applications. Mesh 25 - 325 suitable for electrical and thermal conductivities.
Key Features
- Highly pure electrolytic copper
- Excellent electrical and thermal conductivities
- Versatile mesh size from 25 - 325
- Useful in a wide range of applications
- Effective for coatings, brazing, and soldering
Product Specifications
Material | Copper >99% Purity |
Mesh Size | 25 - 325 |
Form | Granular Mixed Grain |
Applications | Electrical, Mechanical, Decorative |
Similar Products
- High conductivity copper mesh
- Electrical grade copper pellets
- Thermal conductive copper strips
- Fine copper powder for coating
- Brazing grade copper granules
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for Electrical Engineers, Industrial Manufacturers, Artists and Craftsmen, Chemical Technicians, Medical Equipment Manufacturers
Copper Tube 24" Long, Od: 1/8" (3.1 Mm) Copper
These versatile copper tubes are perfect for industrial applications requiring high conductivity and resistance to corrosion. They are commonly used in induction heaters and for hot liquid transfer. The tube is 24" long with an outer diameter of 1/8" (3.1 mm), making it a convenient size for a variety of projects.
Key Features:
- High purity copper powder
- Largest grains in comparison to our other copper powder products
- Darker in color than our other copper powder products
Product Specifications:
Purity | 99.87% |
Hydrogen Loss | 0.21% |
Apparent Density | 2.57g/cc |
Sieve Analysis | Typical |
40 Mesh | 0% |
-40/100 Mesh | 90.4% |
-100/140 Mesh | 9% |
-140 Mesh | 0.6% |
Similar Products
- Copper Tube 12" Long, Od: 1/4" (6.35 Mm)
- Copper Tube 36" Long, Od: 1/2" (12.7 Mm)
- Copper Coil 50' Long, Od: 3/8" (9.53 Mm)
- Copper Sheet 24" x 36", Thickness: 0.032" (0.81 Mm)
- Copper Wire 100' Long, Gauge: 14
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: Please refer to the Safety Data Sheet for Copper Powder before use.
Perfect for:
- Industrial applications
- Manufacturing processes
- Research and development
The target audience for this product is individuals or companies involved in industrial applications, manufacturing processes, and research and development. They are likely to have a technical background and require high purity copper powder for their work. The language and tone of the description should be informative and technical, providing detailed information about the product specifications and key features. It should also highlight the product's versatility and potential applications in various industries.
Copper Tube 36" Long, Od: 3/16" (4.8 Mm)
Copper Tube 36" Long, Od: 3/16" (4.8 Mm) is a versatile copper tube that can be used in a variety of heating applications. These tubes are perfect for making induction heaters, Buzz-wire game projects, water heaters, and for the transfer of hot gases or liquids.
Available in 3 different lengths and thicknesses, copper tubes are a reliable and durable option for any heating project.
Key Features:
- 36" long copper tube
- Outer diameter of 3/16" (4.8 mm)
- Versatile for various heating applications
- Suitable for use in induction heaters, Buzz-wire game project, water heaters, and transfer of hot gases or liquids
- Available in 3 different lengths and thicknesses
- High-quality copper material ensures durability and longevity
Product Specifications:
Product Name: | Copper Tube 36" Long, Od: 3/16" (4.8 Mm) |
Length: | 36 inches |
Outer Diameter: | 3/16" (4.8 mm) |
Material: | Copper |
Common Uses: | Induction heaters, Buzz-wire game project, water heaters, transfer of hot gases or liquids |
Similar Products
- Brass Tube 36" Long, OD: 1/4" (6.35 mm) - Ideal for plumbing and decorative purposes.
- Aluminum Tube 36" Long, OD: 1/2" (12.7 mm) - Lightweight and corrosion-resistant, perfect for HVAC systems.
- Stainless Steel Tube 36" Long, OD: 3/8" (9.53 mm) - Durable and heat-resistant, suitable for high-pressure and high-temperature applications.
- PVC Tube 36" Long, OD: 1" (25.4 mm) - Non-corrosive and easy to install, great for water and drainage systems.
- Titanium Tube 36" Long, OD: 1/8" (3.17 mm) - Strong and lightweight, ideal for aerospace and marine applications.
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: Copper tubes may conduct electricity and should not be used in electrical applications. Use appropriate safety measures when handling hot gases or liquids.
Perfect for:
- DIY enthusiasts who want to create their own induction heaters or Buzz-wire game projects
- Plumbers and HVAC technicians who need copper tubes for water heaters and transfer of hot gases or liquids
- Manufacturers who require copper tubes for their heating applications
- Students and educators who want to teach or learn about the properties and uses of copper tubes
- Homeowners who want to upgrade their heating systems with high-quality copper tubes
- Construction professionals who need copper tubes for their building projects
Copper Tube 48" Long, O.D.: 1/4" (6.2 Mm)
Upgrade your projects with copper tubes for hot liquid transfer. These reliable copper tubes can be used in various applications such as induction heaters, Buzz-wire game projects, water heaters, and transfer of hot gases or liquids. The copper tube is 48 inches long and has an outer diameter of 1/4 inch (6.2 mm).
Key Features
- Reliable copper tubes
- Suitable for hot liquid transfer
- Can be used in various applications
Product Specifications:
Length | 48 inches |
Outer Diameter | 1/4 inch (6.2 mm) |
Similar Products
- Copper Tube 36" Long, O.D.: 1/4" (6.2 Mm)
- Copper Tube 60" Long, O.D.: 1/4" (6.2 Mm)
- Copper Tube 48" Long, O.D.: 3/8" (9.5 Mm)
- Copper Tube 48" Long, O.D.: 1/2" (12.7 Mm)
- Copper Tube 48" Long, O.D.: 5/8" (15.9 Mm)
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for: DIY enthusiasts and professionals looking for reliable copper tubes for hot liquid transfer.
CAUTION: Handle with care when using copper tubes for hot liquid transfer to avoid burns or scalds.
Safety Data Sheet for Copper Powder
CU41, Copper Powder, Mesh 40 (Coarse)
High purity atomized copper powder -40/ 100 US Mesh has the largest grains compared with our other copper powder products. It is also usually darker in color. Minimum purity: 99.0%. Typical Apparent Density: 2.4. Nominal Mesh: -40/ 100. HTS Code: 7406.10.0000. NMFC: 30743. CAS: 7440-50-8. Typical Analysis: Copper: 99.87%, Hydrogen Loss: 0.21%, Apparent Density: 2.57 g/cc. Sieve Analysis: 40 mesh 0%, -40/ 100 mesh 90.4%, -100/ 140 mesh 9%, -140 mesh 0.6%.
Key Features
- High purity, minimum 99.0%
- Coarse grain size, -40/ 100 US Mesh
- Dark color, distinct appearance
- Apparent Density: 2.57 g/cc
- Comprehensive sieve analysis included
Product Specifications
Purity | 99.87% |
Hydrogen Loss | 0.21% |
Apparent Density | 2.57 g/cc |
Mesh Size | >40 mesh 0% -40/ 100 mesh 90.4% -100/ 140 mesh 9% -140 mesh 0.6% |
HTS Code | 7406.10.0000 |
NMFC | 30743 |
CAS Number | 7440-50-8 |
Similar Products
- Fine grain, 99% pure copper powder
- Medium grain, dark copper powder
- High-density, fine copper powder
- Coarse, 98% pure copper flakes
- Atomized, spherical copper granules
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for Industrial Manufacturers, Metal Fabrication Professionals, Chemical Industry Experts, Research and Development Teams, Specialty Alloy Producers
Aluminum Metal Cubes
These lightweight aluminum cubes are perfect for density comparison and experimentation. Made with precision machining, they are available in 10mm or 20mm sizes, and are an excellent addition to any laboratory or classroom.
Key Features
- Precision machining
- Lightweight aluminum material
- Available in 10mm or 20mm sizes
Product Specifications
Material | Aluminum |
Density | 2.7 g/cm3 |
Size Options | 10mm or 20mm |
Weight | Varies by size |
Perfect for:
- Science teachers and students
- Laboratory technicians
- Chemistry enthusiasts
- Physics enthusiasts
- Engineering students
- Metalworking hobbyists
Similar Products
- Copper Metal Cubes
- Brass Metal Cubes
- Titanium Metal Cubes
- Steel Metal Cubes
- Nickel Metal Cubes
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution: Handle with care. These cubes are made of aluminum, which can be a hazard if not handled properly. Keep out of reach of children and use appropriate safety equipment when conducting experiments.
Brass Metal Cubes
Looking for high-quality brass cubes for density comparison and experimentation? Look no further than our Brass Metal Cubes! Available in both 10mm and 20mm sizes, these precision machined cubes are made from top-quality brass material.
Key Features:
- Precision machining
- High-quality brass material
- Available in 10mm or 20mm sizes
Product Specifications:
Material | Brass |
Density | 8.4 g/cm3 |
Size Options | 10mm or 20mm |
Weight | Varies by size |
Similar Products:
- Copper Metal Cubes
- Aluminum Metal Cubes
- Titanium Metal Cubes
- Steel Metal Cubes
- Nickel Metal Cubes
CAUTION: Handle with care. These brass metal cubes are for experimentation and density comparison purposes only. Keep out of reach of children and avoid ingestion or inhalation. Similar products may have different properties and require research before use.
Perfect for:
- Science teachers and students
- Laboratory technicians
- Chemistry enthusiasts
- Researchers and scientists
- Engineering students
- College and university professors
Copper Metal Cubes
These high-density copper cubes are perfect for comparison and experimentation. Available in 10mm or 20mm sizes, they are precision machined and made from high-quality copper material.
Product Specifications
Material | Copper |
Density | 8.96 g/cm3 |
Size Options | 10mm or 20mm |
Weight | Varies by size |
Perfect for:
- Science enthusiasts
- Students studying density and material properties
- Teachers looking for hands-on classroom activities
- Researchers in materials science and engineering
Caution: High-density copper cubes may be hazardous if mishandled. Please use caution when handling and keep out of reach of children.
Similar Products
- Aluminum Metal Cubes
- Brass Metal Cubes
- Titanium Metal Cubes
- Steel Metal Cubes
- Nickel Metal Cubes
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Iron Cubes for Density Comparison and Experimentation
These high-quality iron cubes are perfect for density experiments in the classroom or laboratory. Their precise measurements ensure accurate and consistent results.
Key Features:
- Available in 10 mm or 20 mm sizes.
- Precise measurements for accurate and consistent results.
- High-quality iron material.
Product Specifications:
Material: | Iron |
Sizes: | 10 mm or 20 mm |
Caution:
Caution: Handle with care, as iron can be sharp and heavy.
Similar Products:
- Steel Cubes for Density Comparison and Experimentation
- Aluminum Cubes for Density Comparison and Experimentation
- Copper Cubes for Density Comparison and Experimentation
- Zinc Cubes for Density Comparison and Experimentation
- Brass Cubes for Density Comparison and Experimentation
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for science teachers, students, and researchers.
Lead Metal Cubes
Lead Metal Cubes are high-density cubes designed for density comparison and experimentation. These cubes are made of high-density lead material and are precisely machined for accuracy. They are available in two sizes, 10mm or 20mm, to suit different needs.
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Product Specifications:
Material | Lead |
Density | 11.3 g/cm3 |
Size Options | 10mm or 20mm |
Weight | Varies by size |
Perfect for:
- Science teachers and students
- Chemistry enthusiasts
- Researchers
- Lab technicians
- Metallurgists
- Industrial engineers
Caution: Lead is a toxic material. Handle with care and avoid ingestion or inhalation.
Tin Metal Cubes
Tin Metal Cubes are precision-engineered cubes crafted from high-density tin, ideal for educational and industrial applications. These cubes are meticulously machined to ensure accuracy in size and density, making them perfect for density comparison experiments and material studies. Available in two sizes, 10mm and 20mm, they cater to a variety of needs, from classroom demonstrations to industrial research.
Key Features
- High-density tin construction
- Precision-engineered for accuracy
- Available in 10mm and 20mm sizes
- Suitable for educational and industrial use
- Perfect for density comparison and material studies
Product Specifications
Material | Tin |
Density | 7.31 g/cm³ (Constant) |
Size Options | 10mm or 20mm |
Weight | Varies by size |
Similar Products
- High-precision aluminum alloy cubes
- Compact brass density cubes
- Durable iron calibration cubes
- Lightweight plastic reference cubes
- Precision-cut zinc educational cubes
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution: Lead is a toxic material. Handle with care and avoid ingestion or inhalation.
Perfect for science educators and students, material scientists, industrial researchers, physics instructors, laboratory professionals
Zinc Cubes for Density Comparison and Experimentation
These high-quality zinc cubes are perfect for comparing densities and conducting other physical property experiments in the classroom or laboratory. Their precise measurements ensure accurate and consistent results.
Product Specifications:
Material: | Zinc |
Sizes: | 10 mm or 20 mm |
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: Handle with care when conducting physical property experiments with these high-quality zinc cubes. Research is required to find the best fit for your needs.
Perfect for:
- Science teachers
- Students
- Researchers
Zinc Cubes for Density Comparison and Experimentation
These high-quality zinc cubes are perfect for comparing densities and conducting other physical property experiments in the classroom or laboratory. Their precise measurements ensure accurate and consistent results.
Key Features:
- Available in 10 mm or 20 mm sizes.
- Precise measurements for accurate and consistent results.
- High-quality zinc material.
Similar Products:
- Iron Cubes for Density Comparison and Experimentation
- Aluminum Cubes for Density Comparison and Experimentation
- Copper Cubes for Density Comparison and Experimentation
- Brass Cubes for Density Comparison and Experimentation
- Lead Cubes for Density Comparison and Experimentation
Perfect for science teachers, students, and researchers.
Density Cubes Set
Set of 12 metal and non-metal cubes for learning about density and physical properties.
Key Features
- Provides a tangible, hands-on way of learning about mass, volume, specific gravity, buoyancy, and floatation.
- Each cube has a unique density and weight.
- Metals include major commercial alloys.
- Comes with a material identification guide online or in print.
Product Specifications:
Material | Brass, Copper, Aluminum, Iron, Zinc, Lead, Tin, Soft wood, Hard wood, Plastic, Rubber and Acrylic |
Dimensions | 2 x 2 x 2 cm each |
Weight | N/A |
Packaging | Set of 12 |
Similar Products
- Physical Properties of Matter Kit
- Matter and Density Demonstration Kit
- Mass and Density Cubes
- Properties of Materials Kit
- Density Column Kit
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for hands-on learning and classroom activities for students to learn about density and physical properties of materials.
Fine Iron Filings By Weight Filings, Bulk
Looking for a high-quality iron filing product that is perfect for experimentation with magnetic fields? Look no further than Fine Iron Filings Bulk! This product comes in a convenient shaker with a screw cap for safe-keeping and allows you to easily visualize 3D magnetic fields. It's ideal for classroom demonstrations and home studies, making it perfect for students, educators, hobbyists, and anyone interested in exploring the fascinating properties of magnets.
Key Features:
- Ideal for experimentation with magnetic fields
- Allows you to visualize 3D magnetic fields
- Perfect for classroom demonstrations and home studies
Key Features:
- Ideal for experimentation with magnetic fields
- Allows you to visualize 3D magnetic fields
- Perfect for classroom demonstrations and home studies
High-quality iron filing product that comes in a convenient shaker with a screw cap for safe-keeping. These filings are perfect for experimentation with magnetic fields, allowing you to visualize 3D magnetic fields with ease. Is perfect for students, educators, hobbyists, and anyone interested in exploring the fascinating properties of magnets. With its easy-to-use shaker and screw cap, you can experiment with magnetic fields at home or in the classroom.
Product Specifications:
Product Name | Fine Iron Filings |
Type | Bulk Filings |
Packaging | Convenient shaker with screw cap |
Ideal For | Experimentation with magnetic fields, visualizing 3D magnetic fields, classroom demonstrations, home studies |
Suitable For | Students, educators, hobbyists, anyone interested in exploring the properties of magnets |
Similar Products
- Coarse Iron Filings By Weight Filings, Bulk Coarse Iron Filings Bulk
- Iron Powder for Magnetic Slime Making
- Magnetic Levitation Kit with Iron Filings
- Iron Filings in Oil Suspension for Magnetic Field Demonstrations
- Magnetic Field Viewer Film for Visualizing Magnetic Fields
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: Fine Iron Filings may pose a hazard if ingested or inhaled. Keep out of reach of children and avoid contact with eyes. Use in a well-ventilated area and wear protective gear if necessary. Follow all safety guidelines and precautions when experimenting with magnetic fields.
Perfect for:
- Students
- Educators
- Hobbyists
- Science enthusiasts
Visualize 3D Magnetic Fields
Looking for an easy and convenient way to experiment with magnetic fields? Look no further than Fine Iron Filings! Our high-quality iron filing product comes in a handy shaker with a screw cap for safe-keeping. With Fine Iron Filings, you can easily visualize 3D magnetic fields and explore the fascinating properties of magnets.
Key Features:
- Ideal for experimentation with magnetic fields
- Allows you to visualize 3D magnetic fields
- Perfect for classroom demonstrations and home studies
Whether you're a student, educator, hobbyist, or just someone interested in science, Fine Iron Filings is the perfect product for you. With its easy-to-use shaker and screw cap, you can experiment with magnetic fields at home or in the classroom.
Fine Iron Powder Acid Soluble
Fine Iron Powder is a high-quality, acid-soluble powder ideal for facilitating quick chemical reactions. Its versatility makes it an excellent choice for various applications, including the production of hydrogen gas, wood stains, Iron Sulfate (Ferrous Sulfate), and other iron-based chemicals. The powder exhibits exceptional solubility in diluted sulfuric acid, diluted hydrochloric acid, and diluted acetic acid (Vinegar), ensuring efficient reactions and desired outcomes.
Key Features:
- Facilitates quick chemical reactions
- Enables hydrogen gas production
- Ideal for wood stains
- Suitable for iron-based chemical production
- Highly soluble in diluted acids
Product Specifications:
Specification | Details |
Particle Size | Fine |
Solubility | Acid Soluble |
Applications | Chemical Reactions, Hydrogen Gas Production, Wood Stains, Iron-Based Chemicals |
Similar Products:
- Iron Filings for Chemical Reactions
- Iron Powder for Metallurgical Applications
- Fine Metal Powders for Industrial Use
- Iron Sulfate for Water Treatment
- Iron-Based Catalysts for Chemical Synthesis
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution: If cautions, hazards, or warnings don't exist, this section will be hidden.
Perfect for chemists, chemical manufacturers, industrial researchers, and professionals seeking effective iron-based solutions.
GRPM5 (Micronized Natural Graphite Powder)
GRPM5 is a natural graphite powder with more than 95% carbon content, ground to a fine powder with an average particle size of about 5 microns. It can be used for lubrication, lubricant pastes, conductive pastes, and electroplating on plastics and other non-conductive objects. The powder is also used in powder metallurgy for alloy and sintering control. Its flake-shaped particles allow easy application by brush or foam to create a conductive surface or the metallic shine effect.
Cautions or Warnings: The natural graphite may have impurities such as sulfur, quartz, mica, ash, and humidity.
Product Specifications:
CAS# Graphite: | 7782-42-5 |
CAS# Carbon: | 7740-44-0 |
SKU: | GRPM5 (GRPM five) not GRPMS |
Apparent Density: | 0.25 g/cc |
Key Features:
- 95% carbon content
- Micronized to an average particle size of 5 microns
- Electrically conductive
- Can be used for lubrication, conductive pastes, and electroplating
- Flake-shaped particles for easy application
- Produces a metallic shine effect on skin and smooth surfaces
Product Specifications:
CAS# Graphite: | 7782-42-5 |
CAS# Carbon: | 7740-44-0 |
SKU: | GRPM5 (GRPM five) not GRPMS |
Apparent Density: | 0.25 g/cc |
Similar Products
- Graphite Powder, Fine Flake, 99% Carbon Content, Conductive and Lubricating Properties
- Micronized Graphite Powder, High Purity, 10 Micron Average Particle Size, Used in Powder Metallurgy and Conductive Coatings
- Natural Flake Graphite Powder, 97% Carbon Content, High Temperature Resistance, Used in Refractory Materials and Lubricants
- Graphite Electrode Powder, High Density, Low Electrical Resistance, Used in Electric Arc Furnaces and Steelmaking
- Natural Graphite Powder, Medium Flake, 85% Carbon Content, High Thermal Conductivity, Used in Thermal Management Applications
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: The natural graphite powder may contain impurities such as sulfur, quartz, mica, ash, and humidity. Use with caution and refer to MSDS in the Downloads Tab.
Perfect for:
- Manufacturing industries
- Chemical industries
- Metalworking industries
- Electronics industries
- Research and development laboratories
- Individuals interested in conducting experiments
300SC Iron Powder
300SC is a fine, high purity iron powder specifically designed for industrial seed cleaning applications. It is a mesh 300 product containing spheroidal and irregular easy flow particles.
Typical chemical analysis shows 99% iron content with low levels of impurities such as carbon, oxygen, sulfur, and phosphorus. The typical screen analysis shows a trace amount of material retained on a 200 US Standard Sieve and 3% retained on a -200 325 sieve with 97% passing through a -325 sieve.
Key Features:
- High purity iron powder for industrial seed cleaning
- Mesh 300 product containing spheroidal and irregular easy flow particles
- Qualified and tested for industrial seed cleaning applications
- 99% iron content with low levels of impurities
- Typical screen analysis shows 97% passing through a -325 sieve
Product Specifications:
Chemical Analysis | Typical Values |
Iron | 99% |
Carbon | 0.00% |
Oxygen | 0.05% |
Sulfur | 0.006% |
Phosphorus | 0.001% |
Similar Products:
- Copper Powder
- Zinc Powder
- Aluminum Powder
- Manganese Powder
- Nickel Powder
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Iron Electrodes (Set of 2)
Iron electrodes are a valuable addition to any collection of metals, as they are ideal for use in chemistry and physics experiments where iron is required. Each electrode measures 19mm x 125mm x 0.5mm (5" x 3/4" x 1/32") and is made of low carbon iron sheets. The electrodes are packed in sets of two for convenience. These electrodes are perfect for assembling voltaic cells or in various other chemical or electricity experiments. Please note that the metal electrodes have sharp edges and should be handled with caution.
Product Specifications
Feature | Description |
---|---|
Material | Low Carbon Iron Sheets |
Size (l x w) | 125mm x 20mm (19mm x 125mm x 0.5mm) |
Quantity | 2 Electrodes |
Identification Code | Stamped with "FE" |
Similar Products
- Steel Electrodes (Set of 2)
- Copper Electrodes (Set of 2)
- Zinc Electrodes (Set of 2)
- Aluminum Electrodes (Set of 2)
- Nickel Electrodes (Set of 2)
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for:
- Chemistry and physics students and teachers
- Science enthusiasts
- Researchers
- Experimenters
CAUTION: Metal electrodes have sharp edges.
Fine Iron Powder
Reactive iron powder for chemical reactions, magnetism experiments, and magnetic paints. This high purity, hydrogen reduced, and highly reactive powder is perfect for science labs, educational institutions, and industrial applications. All particles are 150 micron or smaller.
Key Features
- High purity
- Hydrogen reduced
- Highly reactive
- Small particle size
Product Specifications:
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.Iron Content | Over 98% |
Acid Insolubility | 0.0031 |
H2-Loss | 0.009 |
Apparent Density [HALL] | 2.41 G/CC |
Screen Analysis |
|
Perfect for science labs, educational institutions, and industrial applications.
Key Features:
- High purity
- Hydrogen reduced
- Highly reactive
- Small particle size
Product Specifications:
Iron Content | Over 98% |
Acid Insolubility | 0.0031 |
H2-Loss | 0.009 |
Apparent Density [HALL] | 2.41 G/CC |
Screen Analysis |
|
Similar Products
- Hydrogen-reduced Iron Powder
- High Purity Iron Powder
- Fine Iron Powder for Magnetism Experiments
- Iron Powder for Making Magnetic Paints
- Ultrafine Iron Powder for Chemical Reactions
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: This product is highly reactive and should be handled with care during chemical reactions and magnetism experiments. Ensure to follow all safety precautions and wear appropriate protective gear. Please refer to the MSDS in the Downloads Tab for more information.
Perfect for:
- Science labs
- Educational institutions
- Industrial applications
Fine Iron Powder
High purity, hydrogen reduced, highly reactive, fine iron powder for chemical reactions, magnetism experiments, and making magnetic paints. All particles are 150 micron or smaller.
Key Features
- High purity
- Hydrogen reduced
- Highly reactive
- Small particle size
Product Specifications:
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.Iron Content | Over 98% |
Acid Insolubility | 0.0031 |
H2-Loss | 0.009 |
Apparent Density [HALL] | 2.41 G/CC |
Screen Analysis |
|
Perfect for science labs, educational institutions, and industrial applications.
Iron and Carbon Steel Powder
Iron and carbon steel powder is a versatile and cost-effective material used in a variety of industries, including automotive, aerospace, and construction. This powder is made by mixing iron and carbon steel powders, resulting in a material that exhibits the strength and durability of steel, while also being lightweight and easy to work with. It is often used in the production of parts and components that require high strength and durability, such as gears, bearings, and structural components. Iron and carbon steel powder is also known for its excellent magnetic properties, making it a popular choice for use in magnetic applications.
Product Specifications:
Product Name | Iron Powder |
Material Type | Carbon Steel Powder |
Composition | Iron Powder, Carbon, Steel |
Target Group:
- Manufacturers of metal products
- Metalworking companies
- Construction companies
- Automotive industry
- Industrial machinery manufacturers
- Engineering firms
IRON12
IRON12 is a special coarse iron powder with spongy flake structure produced from high purity iron ore by hydrogen reduction method. It is recommended for ground remediation, permeable reactive barriers, and filtration of certain air or gas contamination. Additionally, it can also be used as a source of high purity iron for chemical reactions.
Key Features
- Produced from high purity iron ore
- Spongy flake structure
- Recommended for ground remediation, permeable reactive barriers, and filtration of certain air or gas contamination
- Can also be used as a source of high purity iron for chemical reactions
- Apparent density is between 1 and 1.5 g/cc
- Second Quality Grade is recovered from broken bags or pallets and may contain less than 1% contaminants such as paper, cardboard, wood or soil
Similar Products
- Iron oxide powder
- Iron filings
- Iron powder for metallurgy
- Iron nanoparticles
- Iron granules
Note: These are similar products, but each one is different, so further research is required to determine the best option for your needs.
Caution or Warning
Second Quality Grade shown below is recovered from broken bags or pallets and may contain less than 1% contaminants such as paper, cardboard, wood or soil.Product Specifications
Property | Value |
Material | Iron |
Apparent Density | 1-1.5 g/cc |
Key Features:
- Produced from high purity iron ore
- Spongy flake structure
- Recommended for ground remediation, permeable reactive barriers, and filtration of certain air or gas contamination
- Can also be used as a source of high purity iron for chemical reactions
- Apparent density is between 1 and 1.5 g/cc
- Second Quality Grade may contain less than 1% contaminants such as paper, cardboard, wood or soil
Property | Value |
Material | Iron |
Apparent Density | 1-1.5 g/cc |
Product Specifications:
Property | Value |
Material | Iron |
Apparent Density | 1-1.5 g/cc |
Similar Products
- Iron oxide powder
- Iron filings
- Iron powder for metallurgy
- Iron nanoparticles
- Iron granules
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: Second Quality Grade shown below is recovered from broken bags or pallets and may contain less than 1% contaminants such as paper, cardboard, wood or soil. Please handle with care.
Perfect for:
- Ground remediation professionals
- Permeable reactive barrier designers
- Air or gas contamination filtration experts
- Chemical reaction researchers
Iron Powder, Micronized, Light
Micronized low-density iron powder is one of the finest iron powders available, featuring irregular and flake particles as small as 5 microns. This high-purity, electronic-grade iron dust is ideal for numerous specialized applications. However, due to the small particle size, up to 2-3% of this product may oxidize on the surface during the grinding and packaging processes.
This product serves a wide variety of functions across different industries. It can be used in chemical reactions, as filler metal for plastic or epoxy compounds, in mirror backing, for high-density powder metallurgy (P/M) parts, or as a carrier for photocopy toners. The powder is also an excellent matrix metal for diamond bonding and can be used in various ferromagnetic applications. Additional uses include fingerprinting powders, magnetic inks, and magnetic paints.
However, caution is required when handling, as fine iron dust can form an explosive mixture in the air. Always avoid inhalation, and use a mask and protective clothing during handling.
Key Features
- High-purity, electronic-grade iron powder with 5-micron particles.
- Ideal for chemical reactions, diamond bonding, and ferromagnetic applications.
- Used in fingerprint powders, magnetic inks, and magnetic paints.
- Surface oxidation of 2-3% may occur during packaging.
- Versatile industrial applications including P/M parts and epoxy filler metals.
Product Specifications
Particle Size | 5 microns |
Purity | High-purity electronic grade |
Density | Low-density |
Oxidation Rate | 2-3% during packaging |
Applications | Chemical reactions, plastic fillers, magnetic inks, diamond bonding |
Perfect for chemical professionals, magnetic ink manufacturers, epoxy compound producers, and powder metallurgy experts.
Iron Powder, Super Fine, Light
Iron Powder, Super Fine, Light is a high-purity elemental iron powder manufactured through metallurgical reduction processes using hydrogen gas. This powder features irregular-shaped particles with a porous, sponge-like structure, giving it low density and non-flowing properties. Unlike other super fine iron powders, this product is unique due to its shape and density. It is suitable for a range of applications, including cold casting, resin casting, metal clay work, magnetic pigments, fingerprinting, and the creation of magnetic paints. While it can be used for tension control devices, higher-density free-flowing versions (IRON325ZV and IRON325AT) are recommended for these specific applications.
The powder has an iron content of over 97.7%, with low acid insolubility and an apparent density of less than 2.2 g/cm³. The screen analysis shows that 97.5% of the particles are finer than 325 mesh.
Note: This product is no longer in production, and only limited quantities are available. Consider using alternatives such as IRON325AT or IRON325ZV.
Key Features
- Over 97.7% iron content
- Low-density, porous, non-flowing powder
- Suitable for cold casting, resin casting, and metal clay work
- Ideal for magnetic pigments and fingerprinting
- Recommended alternatives for tension control: IRON325AT, IRON325ZV
- Screen analysis shows 97.5% particles finer than 325 mesh
Product Specifications
Iron Content | > 97.7% |
Acid Insolubility | 0.90% |
Hydrogen Loss | 1.75% |
Apparent Density [HALL] | < 2.2 g/cm³ |
Screen Analysis (-325 Mesh) | 97.5% |
Analysis:
Iron > 97.7%
Acid insolubility = 0.90%
H2-Loss = 1.75%
Apparent Density [HALL] = low <2.2 g/cm3
Screen Analysis:
-100 MESH 100%
200 MESH 0.1%
325 MESH 2.4%
-325 MESH 97.5%
Perfect for manufacturers of casting materials, sculptors, industrial engineers, and researchers developing magnetic products.
Lead Electrodes
Lead Electrodes are versatile components used for assembling voltaic cells or in various chemical or electricity experiments. Each electrode has a size of l x 125 x 20 mm and is stamped with a 2-letter code (Pb) to identify the metal. These electrodes are essential for creating voltaic cells or conducting various chemical or electrical experiments. They are made of high-quality lead and have a size of l x 125 x 20 mm, making them suitable for various applications.
Lead Electrodes are an essential component for any voltaic cell or chemical and electrical experiment. These versatile electrodes are made of high-quality lead and have a size of l x 125 x 20 mm, making them suitable for various applications. Each electrode is stamped with a 2-letter code (Pb) to identify the metal. With their key features, including versatility and durability, these lead electrodes are a must-have for any laboratory or experiment.
Product Specifications:
Product Name | Lead Electrodes |
Size | l x 125 x 20 mm |
Material | High-quality lead |
Code | 2-letter code (Pb) |
Applications | Versatile electrodes suitable for various applications, used for assembling voltaic cells or conducting various chemical or electrical experiments |
Similar Products
- Carbon Electrodes
- Zinc Electrodes
- Copper Electrodes
- Aluminum Electrodes
- Platinum Electrodes
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: Lead electrodes are made of high-quality lead and can be hazardous if not handled properly. Always wear appropriate protective gear and handle with care. Dispose of properly according to local regulations.
Perfect for:
- Chemistry students and teachers
- Electrical engineering students and professionals
- Science enthusiasts who enjoy conducting experiments
- Researchers who need high-quality lead electrodes for their work
- DIYers who enjoy building their own voltaic cells
- Anyone interested in learning more about the properties of lead and its applications in science and technology
Lead Metal Rod, 18" X 1/4"
Lead Rod can be a valuable addition to your collection of metals. This High Purity Rod is perfect for experimentation, application, or collection. With its versatile properties, it can be used in various industries such as construction, automotive, and even in the medical field. Its 18" X 1/4" size makes it easy to handle and maneuver, while its high-quality material ensures durability and longevity. Whether you're an avid collector or a professional in need of a reliable metal, this Lead Metal Rod is an excellent choice.
Product Specifications:
Product Name | Lead Metal Rod |
Dimensions | 18" X 1/4" |
Material | Metal Lead |
Purity | High |
Suitable For | Collection, Experimentation or Application |
Similar Products
- Lead Metal Sheet, 12" X 12" X 1/16" for Shielding or Construction
- Lead Metal Pellets, 1 lb Bag for Ballast or Weighted Applications
- Lead Metal Ingots, 5 lb Block for Casting or Molding
- Lead Metal Foil, 6" X 6" Square for Radiation Shielding or Electrical Applications
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: Lead metal can be hazardous if not handled properly. Please take necessary precautions when handling the lead metal rod. Use gloves and avoid inhalation of any dust or fumes. Dispose of any waste material properly.
Perfect for:
- Science enthusiasts and collectors
- Chemistry students and educators
- Laboratory technicians and researchers
- Industrial professionals in need of high purity lead
- Artists and craftsmen using lead in their work
- Hobbyists interested in metalworking or DIY projects
Lead Metal Sheet
Lead Metal Sheet, Continues 1' Roll is a high-quality, durable metal sheet that is perfect for a variety of applications. Whether you need it for roofing, flashing, or any other purpose, this lead sheet is sure to meet your needs. Made from high-quality lead, it is strong and long-lasting, ensuring that it will stand up to even the toughest conditions. With its excellent resistance to corrosion and weathering, it is the perfect choice for any outdoor application. So if you're looking for a reliable and high-quality metal sheet, look no further than Lead Metal Sheet!
Product Specifications:
Product Name | Lead Metal Sheet |
Size | 1 SqFt: ( W=1’ x L=1’ x T=1/16") 2 SqFt: ( W=1’ x L=2’ x T=1/16") 4 SqFt: ( W=1’ x L=4’ x T=1/16") 8 SqFt: ( W=1’ x L=8’ x T=1/16") |
Weight | 1 SqFt: 3 Lbs Aprox. 2 SqFt: 7 Lbs Aprox. 4 SqFt: 14 Lbs Aprox. 8 SqFt: 29 Lbs Aprox. |
Similar Products
- Sheet Metal, 1 Sq. Ft ( X 1/16"), 3 - 4 Lbs Zinc
- Sheet Metal, 1 Sq. Ft ( X 1/16"), 3 - 4 Lbs Copper
- Sheet Metal, 1 Sq. Ft ( X 1/16"), 3 - 4 Lbs Aluminum
- Sheet Metal, 1 Sq. Ft ( X 1/16"), 3 - 4 Lbs Stainless Steel
- Sheet Metal, 1 Sq. Ft ( X 1/16"), 3 - 4 Lbs Brass
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: This product contains lead, a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm. Handle with gloves and avoid inhaling dust or fumes during use. Dispose of properly according to local regulations.
Perfect for:
- Construction workers and contractors
- Roofing companies
- Plumbers and pipefitters
- DIY enthusiasts and hobbyists
- Environmental remediation professionals
- Medical professionals for radiation protection
Lead Metal Wire, 5 Feet Coil
This Lead (Pb) wire is a valuable addition to your collection of metals. With a diameter of 1/8", this wire is 5 feet long and is perfect for playing and experimenting with due to its softness.
Product Specifications:
Product Name | Lead Metal Wire, 5 Feet Coil |
Diameter | 1/8" |
Length | 5 Feet |
Material | Lead (Pb) |
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: Lead (Pb) is a toxic metal and can cause serious health hazards if ingested or inhaled. Handle with care and avoid contact with skin or eyes. Use appropriate safety equipment when handling.
Perfect for:
- Science enthusiasts
- Chemistry students
- Metallurgy hobbyists
- Artists and sculptors
- Teachers and educators
- DIY enthusiasts
Magnesium Electrode Coil
Magnesium Electrode Coil is a high purity magnesium strip formed as a coil to provide a larger surface contact with electrolyte. This product is a valuable addition to any collection of metals due to its unique properties and uses. Magnesium is a lightweight and strong metal that is commonly used in the aerospace and automotive industries. Its ability to ignite easily also makes it a popular choice for flares and fireworks. The Magnesium Electrode Coil is made with the highest quality materials and is sure to meet your needs for any application.
Product Specifications:
Product Name | Magnesium Electrode Coil |
Material | Magnesium |
Form | Coil |
Purity | High |
Target Group:
- Chemistry students and professionals
- Scientists and researchers in the field of electrochemistry
- Manufacturers of batteries and other electronic devices
- Individuals interested in collecting rare and unique metals
- Industrial companies involved in the production of magnesium-based products
- Engineering firms specializing in materials science and metallurgy
Magnesium Electrode Flat
Magnesium Electrode Flat is a rectangular-shaped electrode made of high-purity magnesium metal and stamped with letters "Mg" to identify the electrode type. It is a valuable addition to any collection of metals and is suitable for various chemical experiments. With an overall length of 12 centimeters and a width of 2 centimeters, this magnesium electrode flat provides ample surface area for chemical reactions. However, it is important to note that magnesium is a flammable metal and should be kept away from any flame.
Key Features:
- High-purity magnesium metal electrode
- Rectangular shape with letters "Mg" stamped on it to identify the electrode type
- Suitable for various chemical experiments
- Overall length of 12 centimeters and width of 2 centimeters
- Chemistry data includes aluminum, copper, iron, magnesium, manganese, nickel, silicon, and zinc
- Warning: Magnesium is a flammable metal, keep away from any flame
Key Features:
- High-purity magnesium metal electrode
- Rectangular shape with letters "Mg" stamped on it to identify the electrode type
- Suitable for various chemical experiments
- Overall length of 12 centimeters and width of 2 centimeters
- Chemistry data includes aluminum, copper, iron, magnesium, manganese, nickel, silicon, and zinc
- Warning: Magnesium is a flammable metal, keep away from any flame
Unique Selling Point: This magnesium electrode flat is made of high-purity magnesium metal, making it a valuable addition to any collection of metals for chemical experiments.
Product Specifications:
Product Name | Magnesium Electrode Flat |
Material | High-purity magnesium metal |
Dimensions | 12 cm x 2 cm |
Identification | Stamped with letters "Mg" |
Chemistry Data (Standard AZ31B) | Aluminum: 2.5% to 3.5%, Copper: 0.05% max, Iron: 0.005% max, Magnesium: balance, Manganese: 0.2% min, Nickel: 0.005% max, Silicon: 0.1% max, Zinc: 0.6% to 1.4% |
Features |
|
Similar Products
- Aluminum Electrode Flat
- Zinc Electrode Flat
- Copper Electrode Flat
- Silicon Electrode Flat
- Manganese Electrode Flat
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Each of these electrodes is made of high-purity metal and is suitable for various chemical experiments. They come in a rectangular shape with the respective metal stamped on it to identify the electrode type. The overall length and width of each electrode provide ample surface area for chemical reactions. However, it is crucial to handle each metal electrode with care as they may have their respective safety precautions.
CAUTION: Magnesium is a flammable metal, keep away from any flame.
Perfect for:
- Chemistry enthusiasts and students
- Chemical experimenters and researchers
- Science teachers and professors
- Laboratory technicians and professionals
- Metal collectors and hobbyists
- Individuals interested in chemical reactions and properties of metals
Magnesium Ribbon Deluxe - 27 Grams
Introducing our high quality Magnesium Ribbon Deluxe, weighing 25-29 grams and formed in a roll. This flammable solid is perfect for combustion experiments and measures about 3mm wide and 0.03mm thick. Our ribbon is available in Miniscience Brand, known for its high quality, smooth surface and edges, and easy to start ignition. It is also available in India Brand, which takes more heat to ignite, has some filings and roughness in edges or surface, and is offered at a lower price. Each roll contains 500 inches (about 40 feet) of Magnesium Metal Strip, making it a great value for your experiments.
Key Features:
- Deluxe quality magnesium ribbon
- 27 grams of magnesium in a roll
- 500 inches (about 40 feet) long
- Flammable solid for combustion experiments
- Available in high quality Miniscience brand or lower priced India brand
- Smooth surface and edges for easy ignition with Miniscience brand
Product Specifications:
Product Name | Magnesium Ribbon |
Type | Deluxe |
Weight | 27 Grams |
Brand | High Quality Miniscience Brand |
Length | 500 Inches (About 40 Feet) |
Weight of Strip | 25 - 29 Grams |
Dimensions | About 3 Mm Wide And 0.03Mm Thick |
Intended Use | For Combustion Experiments |
Flammability | Flammable Solid |
Brand Options | High Quality Miniscience Brand and India Brand (Lower Price) |
Similar Products
- High Quality Magnesium Ribbon, 27 Grams, Deluxe
- Miniscience Brand Magnesium Ribbon, 500 Inches, High Quality
- India Brand Magnesium Ribbon, 500 Inches, Lower Price
- Premium Magnesium Ribbon, 30 Grams, High Quality
- Professional Grade Magnesium Ribbon, 25-29 Grams, Flammable Solid
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution: Flammable solid. Handle with care and keep away from heat sources. Only use for combustion experiments in a controlled environment. Use proper protective equipment and follow all safety guidelines. Available in high quality Miniscience brand and lower priced India brand with some roughness in edges or surface.
Perfect for:
- Science teachers and students conducting combustion experiments
- Chemistry enthusiasts and hobbyists
- Professionals in the pyrotechnic industry
- Individuals interested in learning about the properties of magnesium
- Anyone looking for a high-quality, reliable source of magnesium ribbon
- Those who prefer Miniscience Brand for its smooth surface and easy ignition
Magnesium Ribbon, Economy Grade, ~ 40 Feet Long
Magnesium Ribbon in Economy Grade is a versatile product that can be used for a variety of purposes. The ribbon is approximately 40 feet long, making it ideal for larger projects. Made from high-quality magnesium, this ribbon is durable and long-lasting. The economy grade ensures that this product is affordable, without sacrificing quality. Whether you are a DIY enthusiast or a professional, this Magnesium Ribbon is a great addition to your toolkit.
Product Specifications:
Product Name | Magnesium Ribbon |
Grade | Economy Grade |
Length | ~ 40 Feet Long |
Material | Magnesium |
Target Group:
- Chemistry students
- Laboratory technicians
- Science teachers
- Industrial professionals
- Research scientists
- Manufacturing companies
CAUTION: Magnesium ribbon is highly flammable and can ignite easily. Use with caution and keep away from heat sources, sparks, and open flames.
Magnesium Stick Stick
Introducing the Magnesium Stick Stick, a high-quality 99.8% magnesium stick that weighs 1 lb and measures 1.3" (32mm) in diameter and 12" (300mm) in length. This versatile product can be used to make magnesium parts or magnesium alloys, making it an essential tool for any metalworking enthusiast. With its high purity level, the Magnesium Stick Stick ensures that your creations will be of the highest quality. Get your hands on this amazing product today and take your metalworking skills to the next level!
Key Features:
- 99.8% pure magnesium
- 1 lb stick with a diameter of 1.3" (32mm) and length of 12" (300mm)
- Can be used to make magnesium parts or alloys
- High quality and reliable material
- Easy to use and handle
- Perfect for industrial and DIY applications
Product Specifications:
Product Name | Magnesium Stick |
Material | 99.8% Magnesium |
Weight | 1 Lb |
Diameter | 1.3" (32mm) |
Length | 12" (300mm) |
Intended Use | May be used to make magnesium parts or magnesium alloys |
CAUTION: Handle with care. Magnesium is highly flammable and can ignite spontaneously in air. Keep away from heat, sparks, and open flames. Use only in well-ventilated areas and wear appropriate protective gear.
Perfect For:
- Industrial manufacturers
- Metalworkers
- Engineers
- Scientists
- Students studying metallurgy or materials science
- Individuals interested in metalworking or DIY projects
Magnesium Sheet 8" X 5" Sheet
This Magnesium Sheet 8" X 5" Sheet is a high strength to weight ratio product that is perfect for general purpose use. It contains about 95% magnesium, with the remaining 5% being mainly aluminum and zinc that improve the physical property of the product. The sheet is cut to 8&Quot; X 5&Quot; (125Mm X 205Mm) and has a thickness of 0.04 inch (1 millimeter).
Key Features:
- 8" X 5" sheet size
- General purpose magnesium sheet
- High strength to weight ratio
- Contains 95% magnesium, 5% aluminum and zinc for improved physical properties
- Thickness of 0.04 inch (1 millimeter)
- Easy to cut to desired size
Product Specifications:
Product Name | Magnesium Sheet |
Dimensions | 8" X 5" Sheet (125mm X 205mm) |
Composition | Contains about 95% Magnesium. The remaining 5% is mainly Aluminum and Zinc. |
Purpose | General Purpose |
Strength | High Strength to Weight Ratio |
Thickness | 0.04 Inch (1 Milimeter) |
Similar Products
- Magnesium Sheet 10" X 6" Sheet, General Purpose, High Strength To Weight Ratio. Contains About 95% Magnesium. The Remaining 5% Is Mainly Aluminum And Zinc That Improve The Physical Property Of The Product. It Is Cut To 10" X 6" (150mm X 245mm) And The Thickness Is 0.04 Inch (1 Milimeter).
- Magnesium Plate 8" X 5" Plate, High Purity, High Strength To Weight Ratio. Contains About 99.9% Magnesium. It Is Cut To 8" X 5" (125mm X 205mm) And The Thickness Is 0.08 Inch (2 Milimeters).
- Magnesium Alloy Sheet 8" X 5" Sheet, General Purpose, High Strength To Weight Ratio. Contains About 90% Magnesium, 8.9% Aluminum And 1.1% Zinc. It Is Cut To 8" X 5" (125mm X 205mm) And The Thickness Is 0.04 Inch (1 Milimeter).
- Magnesium Ribbon 8" Length, High Purity, Used For Laboratory And Chemical Applications. Contains About 99.9% Magnesium. The Width Is 0.08 Inch (2 Milimeters) And The Thickness Is 0.02 Inch (0.5 Milimeter).
- Magnesium Powder 1 Pound, High Purity, Used For Pyrotechnics, Welding And Other Applications. Contains About 99.9% Magnesium. The Particle Size Is 325 Mesh (44 Microns).
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: Magnesium is highly flammable and can ignite easily. Avoid exposing the sheet to heat, sparks or flames. Use caution when handling and storing as it can react with water and produce flammable hydrogen gas. Wear appropriate protective gear when cutting or working with this material.
Perfect for:
- Engineers and designers looking for a lightweight and strong material for their projects
- Manufacturers seeking a general-purpose material with high strength to weight ratio
- Industrial and commercial users in need of a durable and reliable product
- Research and development teams exploring new materials and their properties
- Science enthusiasts interested in learning about the physical properties of magnesium and its alloys
- Students and educators studying materials science, chemistry, and engineering
Magnetite
Magnetite is a natural mineral that is commonly used in various industries. Our Mesh 325 Natural Magnetite is a high-quality product that is perfect for use in the production of heavy concrete, dense media separation, and as a pigment in paints and coatings. This type of Magnetite is also commonly used in water treatment and filtration systems due to its magnetic properties that allow it to easily attract and remove impurities. With our Mesh 325 Magnetite, you can be assured of superior quality and performance in your applications.
Product Specifications:
Product Name | Magnetite |
Type | Natural |
Mesh Size | 325 |
Form | Natural |
Usage | Magnetite |
Perfect For:
- Geologists
- Mining companies
- Construction companies
- Manufacturing companies
- Research institutions
- Environmental agencies
Nickel Electrode (Nickel Anode), 5" X 3/4" Electrode
The Nickel Electrode or Nickel Anodes is a high-purity (>99%) nickel electrode with dimensions of 5" x 3/4" x 3/64" (12cm x 2cm x 1.2mm). It is designed for use in demonstration, chemical experiments, and physics experiments related to density, magnetism, and heat conductivity. The electrode is suitable for single metal assemblies for voltaic cells or in various other chemical or electricity experiments.
Key Features
- High-purity (>99%) nickel electrode
- Dimensions of 5" x 3/4" x 3/64" (12cm x 2cm x 1.2mm)
- Used in chemical and physics experiments related to density, magnetism, and heat conductivity
- Stamped with a 2-letter code to identify the metal
- Sold individually or in discounted quantities
Product Specifications
Material | Nickel |
Size (l x w) | 5" x 3/4" or 125 x 20mm |
Purity | 99% |
Warning: Metals have sharp edges. For professional use or use under supervision only.
Key Features:
- High-purity (>99%) nickel electrode
- Dimensions of 5" x 3/4" x 3/64" (12cm x 2cm x 1.2mm)
- Used in chemical and physics experiments related to density, magnetism, and heat conductivity
- Stamped with a 2-letter code to identify the metal
- Sold individually or in discounted quantities
Product Specifications:
Material | Nickel |
Size (l x w) | 5" x 3/4" or 125 x 20mm |
Purity | 99% |
Similar Products
- Copper Electrode (Copper Anode), 5" X 3/4" Electrode, Copper, Anode
- Zinc Electrode (Zinc Anode), 5" X 3/4" Electrode, Zinc, Anode
- Aluminum Electrode (Aluminum Anode), 5" X 3/4" Electrode, Aluminum, Anode
- Silver Electrode (Silver Anode), 5" X 3/4" Electrode, Silver, Anode
- Gold Electrode (Gold Anode), 5" X 3/4" Electrode, Gold, Anode
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Warning: Metals have sharp edges. For professional use or use under supervision only.
Perfect for:
- Chemistry and physics students conducting experiments related to density, magnetism, and heat conductivity
- Teachers and educators looking for a high-quality nickel electrode for demonstration purposes
- Professionals in the fields of chemistry and physics using single metal assemblies for voltaic cells or other chemical and electricity experiments
Nickel Flake 18 Micron Average Flake
Nickel Flake 18 Micron Average Flake is a high-quality product that is made of nickel and has an average flake size of 18 microns. This product is perfect for a variety of industrial applications, including electroplating, catalysis, and battery manufacturing. Nickel Flake 18 Micron Average Flake is known for its excellent corrosion resistance and high thermal conductivity, making it a popular choice for use in harsh environments. Additionally, this product is easy to handle and store, making it a convenient and practical choice for any industrial setting.
Product Specifications:
Product Name | Nickel Flake 18 Micron Average Flake |
Material | Nickel |
Micron | 18 Micron |
Average Flake Size | Average Flake |
Similar Products
- Nickel Powder 20 Micron Average Powder
- Nickel Wire 0.5mm Diameter
- Nickel Plate 3mm Thickness
- Nickel Sulfate Solution 100g/L Concentration
- Nickel Oxide Powder 99% Purity
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution: Nickel flakes may pose a hazard if inhaled. Use proper protective equipment and handle with care.
Perfect for:
- Manufacturing companies that require nickel flakes for their products
- Chemical companies that use nickel flakes in their production processes
- Metalworking companies that need high-quality nickel flakes for their projects
- Research and development teams that work with nickel-based materials
- Individuals who are interested in metallurgy and want to experiment with nickel flakes
- Industries that require high-purity nickel flakes for their applications
Nickel Pellets, Electrolytic Grade
Nickel Pellets, Electrolytic Grade are highly pure with a purity level of at least 99.9%. These pellets are perfect for chemical reactions and for making special alloys. With a diameter range of 6mm up to 18mm (1/4" up to 3/4"), these pellets are versatile and can be used for a variety of applications.
Product Name: | Nickel Pellets, Electrolytic Grade (100 Grams) |
Pellet Type: | Pellets |
Grade: | Electrolytic |
Purity: | At least 99.9% |
Suitable for: | Chemical reactions and making special alloys |
Pellet Diameter: | 6mm up to 18mm (1/4" up to 3/4") |
Similar Products
- Nickel Powder, High Purity (100 Grams)
- Nickel Wire, Electrolytic Grade (1 Meter)
- Nickel Foil, Ultra-Thin (10 Grams)
- Nickel Sheet, High Purity (50 Grams)
- Nickel Rod, Electrolytic Grade (1 Meter)
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution: Handle with care and use appropriate protective equipment when handling nickel pellets, as they may pose a hazard if ingested or inhaled. Keep out of reach of children and animals.
Perfect for:
- Chemical laboratories
- Manufacturers of special alloys
- Chemical researchers
- Industrial chemists
- Metallurgists
- Engineering students
Note: The target audience for this product is professionals and students in the fields of chemistry, metallurgy, and engineering who require high-purity nickel pellets for their work. The language and tone of the description should be technical and informative to cater to their needs and interests.
Platinum Electrodes For Hoffman Electrolysis Apparatus
These Platinum Electrodes are designed specifically for use with Hoffman Electrolysis Apparatus. They are made of high-quality platinum and ensure efficient and accurate electrolysis. These electrodes are a must-have for any laboratory that requires precision and reliability in their experiments. With their durable construction and exceptional conductivity, these electrodes are the perfect choice for all your electrolysis needs.
Product Specifications:
Product Name | Platinum Electrodes For Hoffman Electrolysis Apparatus |
Material | Platinum |
Apparatus Type | Hoffman |
Electrolysis Type | Apparatus Electrolysis |
Perfect For:
- Chemistry researchers and professionals
- Scientists and engineers working with electrolysis
- Academic institutions and research facilities
- Manufacturers and distributors of electrolysis equipment
- Chemical and pharmaceutical companies
- Advanced chemistry students and educators
Silver Metal Spherical Powder 8 Micron
Silver Metal Spherical Powder 8 Micron is a high-quality powder that is spherical in shape and made of silver metal. It is ideal for use in a variety of applications, including electronics, aerospace, and medical devices. This powder has a particle size of 8 microns, which makes it perfect for use in applications that require a fine powder. It is also highly pure, with a purity of 99.9%, making it an excellent choice for applications that require a high level of purity. Overall, Silver Metal Spherical Powder 8 Micron is a versatile and reliable powder that is perfect for a wide range of applications.
Product Specifications:
Product Name: | Silver Metal Spherical Powder 8 Micron |
Shape: | Spherical |
Color: | Silver |
Material: | Metal |
Micron Size: | 8 Micron |
Perfect For:
- Manufacturing companies
- Jewelry makers
- Electronics industry
- Research and development laboratories
- Metallic ink and paint manufacturers
- Metallic coating and plating companies
Silver Powder, Fine Flake >99%
Silver Powder, Fine Flake >99% is a high-quality silver powder that is perfect for a wide range of applications. This product is made from pure silver and is available in both powder and flake form. It is ideal for use in electronic components, conductive coatings, and other industrial applications. With a purity of over 99%, this product is highly sought after for its exceptional quality and consistency. Whether you are looking for a reliable source of silver powder for your business or personal use, Silver Powder, Fine Flake >99% is the perfect choice.
Product Specifications:
Product Name: | Silver Powder, Fine Flake >99% |
Product Type: | Powder, Silver, Flake |
Purity: | >99% |
Perfect for:
- Jewelry makers
- Electronics manufacturers
- Artists
- Chemical researchers
- Industrial companies
- Silver collectors
Small Steel Shapes (1.5 Oz.)
Small Steel Shapes (1.5 Oz.) is a unique product that contains many different, loose steel shapes that are ideal for experimentation with magnetic fields. These shapes are slightly larger than the very fine iron filings and can be used to measure magnet strength by counting how many of these shapes are attracted to the magnet. This tube is perfect for anyone who is interested in science experiments or simply wants to explore the properties of magnetism. Get your hands on Small Steel Shapes (1.5 Oz.) and discover a whole new world of scientific exploration!
Product Name | Small Steel Shapes (1.5 Oz.) |
Material | Steel |
Size | Small Shapes |
Weight | 1.5 Oz. |
Ideal Use | Experimentation with Magnetic Fields, Measuring Magnet Strength |
Additional Information | Contains many different, loose steel shapes |
Similar Products
- Large Steel Shapes (3 Oz.)
- Steel Ball Bearings (1/4" Diameter)
- Steel Wool (Fine Grade)
- Iron Filings (Coarse Grade)
- Magnetic Sand (1 lb. Bag)
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for:
- Science enthusiasts
- Students learning about magnetism
- Teachers looking for hands-on experiments
- Hobbyists interested in metalworking
- Artists looking for unique materials
- Anyone interested in exploring the properties of steel
CAUTION: Contains small steel shapes which may pose a hazard if swallowed or inhaled. Keep out of reach of children and handle with care.
Soft Magnetic Iron Powder
Soft Magnetic Iron Powder is a type of magnetic powder that is commonly used in various applications such as electronic components, magnetic recording media, and magnetic shielding. This powder is made from high-purity iron and has excellent magnetic properties that make it ideal for magnetic applications. With its soft magnetic characteristics, this powder is easy to magnetize and demagnetize, making it a versatile material for a wide range of applications. Soft Magnetic Iron Powder is also known for its high permeability, low coercivity, and low hysteresis loss, making it an efficient and cost-effective choice for magnetic applications.
Key Features:
- Soft magnetic properties
- Powder form for easy processing
- High purity
- Excellent magnetic permeability
- Low core loss
- Wide range of applications in electronic devices and power transformers
Product Specifications:
Product Name | Soft Magnetic Iron Powder |
Type | Magnetic Powder |
Material | Soft Magnetic Iron Powder |
Application | Soft Magnetic Applications |
Properties | High Magnetic Permeability, Low Core Losses, Good Saturation Induction |
Particle Size | Varies |
Packaging | 25kg bags |
Similar Products
- Ultrafine Soft Magnetic Iron Powder
- High Purity Soft Magnetic Iron Powder
- Nanocrystalline Soft Magnetic Iron Powder
- Low Curie Temperature Soft Magnetic Iron Powder
- High Saturation Soft Magnetic Iron Powder
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: This product may contain hazardous materials. Please handle with care and follow proper safety protocols.
Perfect for:
- Manufacturing companies specializing in magnetic materials
- Research and development departments in the electronics industry
- Engineers and scientists working with magnetic materials
- Industrial designers creating products that require magnetic properties
- Academic institutions teaching courses on magnetic materials
- Individuals interested in the properties and applications of soft magnetic iron powder
Stainless Steel Electrode
Stainless Steel Electrodes are made of grade 314 stainless steel alloy, which is highly resistant to corrosion due to the content of nickel and chromium in its composition. These electrodes are suitable for various applications that require corrosion-resistant properties.
Each electrode measures about 12 cm x 2 cm x 1 mm (5" x 3/4" x 0.359") and has a weight of about 18 grams. The size and weight of these electrodes make them suitable for various applications.
The grade 314 stainless steel alloy used in these electrodes contains nickel and chromium, which provide high resistance to corrosion. This makes the electrodes suitable for use in environments that are prone to corrosion, such as in marine or chemical industries.
Key Features:
- Corrosion-resistant stainless steel electrodes
- Made of grade 314 stainless steel alloy
- Highly resistant to corrosion due to the content of nickel and chromium in its composition
- Each electrode measures about 12 cm x 2 cm x 1 mm (5" x 3/4" x 0.359")
- Weight of each electrode is about 18 grams
- Suitable for various applications that require corrosion-resistant properties
Corrosion-resistant stainless steel electrodes for various applications.
Key Features:
- Corrosion-resistant stainless steel electrodes
- Made of grade 314 stainless steel alloy
- Highly resistant to corrosion due to the content of nickel and chromium in its composition
- Each electrode measures about 12 cm x 2 cm x 1 mm (5" x 3/4" x 0.359")
- Weight of each electrode is about 18 grams
- Suitable for various applications that require corrosion-resistant properties
Product Specifications:
Material | Stainless Steel Alloy (Grade 314) |
Corrosion Resistance | Highly resistant due to nickel and chromium content |
Dimensions | 12 cm x 2 cm x 1 mm (5" x 3/4" x 0.359") |
Weight | 18 grams |
Applications | Suitable for various applications that require corrosion-resistant properties |
Similar Products
- Stainless Steel Welding Wire
- Stainless Steel Flux-Cored Wire
- Stainless Steel TIG Rods
- Stainless Steel MIG Wire
- Stainless Steel Stick Electrodes
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: These electrodes are suitable for use in environments that are prone to corrosion, such as in marine or chemical industries. Please ensure proper safety measures are taken when handling and using these electrodes in such environments.
Perfect for:
- Manufacturing companies in marine or chemical industries
- Welders who require corrosion-resistant properties
- Construction companies working with stainless steel
- Industrial companies with high corrosion-prone environments
- Engineering firms specializing in corrosion-resistant materials
- Individuals looking for high-quality stainless steel electrodes
Steel Powder
Steel Powder is a highly versatile product that can be used for a variety of applications. It is made from iron powder and is available in coarse, dense, and filler metal varieties. This particular product also comes with free shipping, making it a great value for customers. Whether you're looking to create a strong and durable metal product or need a reliable filler material for welding, Steel Powder is the perfect choice. Order yours today and experience the benefits of this high-quality product.
Product Specifications:
Material | Steel Powder, Iron Powder |
Texture | Coarse, Dense |
Type | Filler Metal |
Shipping | Free Shipping |
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: This product contains steel and iron powders which may pose a hazard if inhaled. Use proper protective equipment and handling procedures.
Perfect for:
- Welders and metalworkers
- Manufacturing companies
- Construction companies
- DIY enthusiasts
- Metal fabricators
- Artists and sculptors
Steel Powder, Iron Powder, Grade S1001 (Free Shipping)
Steel Powder, Iron Powder, Grade S1001 (Free Shipping) is a high-quality metal powder that is perfect for a variety of industrial applications. Made from top-grade steel and iron, this powder is designed to provide exceptional strength and durability, making it ideal for use in heavy-duty machinery and equipment. With its free shipping offer, this powder is a cost-effective solution that can help you save money while still getting the high-quality materials you need for your projects. Whether you're working on a large-scale construction project or a small repair job, Steel Powder, Iron Powder, Grade S1001 (Free Shipping) is the perfect choice for all your metal powder needs.
Product Specifications:
Material | Steel Powder, Iron Powder, Grade S1001 |
Shipping | Free Shipping |
Target Group:
- Manufacturers of metal products
- Industrial companies
- Construction companies
- Welders and metalworkers
- Metal fabrication businesses
- Engineering firms
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: This product contains steel and iron powder which may pose a hazard if mishandled. Use appropriate safety measures when handling and storing this product.
Coarse Steel Powder Mesh 100
Coarse steel powder mesh 100 is an imported iron-steel powder that may have some contamination caused by repackaging from broken paper bags into plastic or metal pails. It can be used for soil, concrete, sculpture, or as a substitute for cast iron powder. Some packages may have been damaged and will be repackaged before shipping.
Applications of S100 include performing science experiments related to magnetism or electromagnetism, creating a rust effect in sculptures, concrete, and other structures, and as a plant nutrient as a source of iron.
Key Features:
- Coarse steel powder mesh 100 for soil, concrete, sculpture, and science experiments
- May have some contamination due to repackaging from broken paper bags
- Chemical analysis shows carbon, manganese, silicon, sulfur, and phosphorous content
- Also known as black iron powder and iron filing
- Pay as low as $1.25/lb for special orders of 3000-Lb or more
Product Specifications:
Chemical Analysis | Range |
Carbon | 0.8% - 1.2% |
Manganese | 0.35% - 1.2% |
Silicon | 0.4% Minimum |
Sulfur | 0.05% Maximum |
Phosphorous | 0.05% Maximum |
Note: Clumped product in 55-lb pails is only recommended for acid reactions, stain production, soil fortification, and some rust effect applications. No COA is available for this product.
Similar Products:
- Cast Iron Powder
- Steel Powder Mesh 200
- Iron Filing
- Magnetic Iron Powder
- Iron Oxide Powder
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Steel Powder, Spherical Mesh 16
Steel Powder, Spherical Mesh 16 is a high-quality steel powder that is used in various applications such as additive manufacturing, metal injection molding, and welding. This powder is made from spherical steel particles that have a diameter of 16 mesh, which makes it ideal for producing parts with high density and strength. The Steel Powder, Spherical Mesh 16 is also known for its excellent flowability and low oxygen content, which ensures the quality of the final product. Whether you are a manufacturer, engineer, or designer, Steel Powder, Spherical Mesh 16 is a reliable and efficient material that can help you achieve your goals.
Product Specifications:
Product Name | Steel Powder |
Shape | Spherical |
Mesh Size | 16 |
Target Group:
- Manufacturing companies in the automotive industry
- Construction companies using steel for building projects
- Metalworking companies for welding and fabrication
- Maintenance and repair companies for machinery and equipment
- Research and development institutions for material science
- Industrial laboratories for testing and analysis
Similar Products
- Steel Dust
- Steel Granules
- Spherical Mesh 20 Steel Powder
- Spherical Mesh 12 Steel Powder
- Steel Shavings
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: This product contains steel powder which may pose a hazard if ingested or inhaled. Use appropriate protective measures when handling.
Steel Powder, Spherical Mesh 16 (IP16M)
Steel Powder, Spherical Mesh 16 (IP16M), is a premium-grade, spherical steel powder optimized for high-density and high-flow applications. With its 16-mesh particle size, this powder is specifically designed for both manufacturing and wildlife deterrence. Its precision flowability enhances its performance in additive manufacturing and metal injection molding, allowing it to create durable, dense components for automotive and structural applications. Additionally, it is highly suitable for non-lethal deterrent rounds, efficiently dispersing in bird and wildlife management efforts, and offers excellent bonding in welding and fabrication processes. Due to its low oxygen content and controlled particle size, this steel powder is a preferred choice for industries requiring high-quality steel powder for various precision applications.
Key Features
- High-density steel for durable industrial components
- Optimal flow characteristics for precision manufacturing
- Effective for non-lethal wildlife and bird deterrence
- Low oxygen content for improved welding performance
- Compatible with additive manufacturing and injection molding
Product Specifications:
Product Name | Steel Powder |
Shape | Spherical |
Mesh Size | 16 |
Oxygen Content | Low |
CAUTION: This product contains steel powder, which may pose hazards if ingested or inhaled. Use appropriate protective measures when handling.
Perfect for automotive manufacturers, metalworking firms, wildlife control, material scientists, and industrial labs.
Steel Powder, Spherical Mesh 50 (IP50M)
Steel Powder, Spherical Mesh 50 (IP50M) is crafted from a high-grade, low-carbon magnesium steel alloy known for its reliability in precision industrial applications. This powder features 95% spherical particles that enhance flow consistency and density, making it suitable for uses requiring high accuracy and controlled impact. With a particle size around 0.1 mm, it excels in non-lethal wildlife dispersal, pyrotechnics, and dense part manufacturing for aerospace and automotive industries. The consistent dark gray color and bulk density of 4.3 g/cc provide aesthetic and functional advantages across applications.
Key Features
- Low-Carbon Magnesium Steel Alloy: Ensures durability for industrial use.
- 95% Spherical Particles: Enables uniform flow and compaction.
- Apparent Bulk Density of 4.3 g/cc: Ideal for dense, controlled applications.
- Uniform Dark Gray Color: Supports quality control standards.
- Particle Diameter ~0.1 mm: Suitable for impact and dispersion.
Product Specifications
Material | Low carbon magnesium steel alloy |
Particle Shape | 95% spherical, balance spheroids/clusters |
Color | Dark Gray |
Particle Diameter | Approximately 0.1 mm |
Bulk Density | 4.3 g/cc |
CAUTION: Contains steel powder; avoid inhalation or ingestion. Use protective gear.
Perfect for Metalworking, Wildlife Control, Automotive and Aerospace, Materials Research, Military Training
Super Fine Iron Powder
Super Fine Iron Powder is a highly refined and pure form of iron powder that is commonly used in a variety of industrial applications. This Atomized Powder is produced by atomizing molten iron with high-pressure air, resulting in a fine, spherical powder that is highly uniform in size and shape. The Super and Atomized Super Fine Iron Powder products offer even greater levels of purity and uniformity, making them ideal for use in demanding applications where consistency and reliability are critical. Whether you need a high-quality iron powder for metallurgical processes, magnetic applications, or other industrial uses, Super Fine Iron Powder is the perfect choice.
Product Specifications:
Product Name: | Super Fine Iron Powder |
Type: | Atomized Powder |
Grade: | Super |
Particle Size: | Atomized Super Fine Iron Powder |
Appearance: | Atomized Super Fine Iron Powder |
Application: | Atomized Super Fine Iron Powder |
Packaging: | Atomized |
Perfect For:
- Manufacturing companies that require high-quality iron powder for their products
- Research and development teams in the field of metallurgy and materials science
- Metalworking hobbyists and enthusiasts
- Industrial engineers and designers
- Companies specializing in the production of automotive and aerospace parts
- Metal powder distributors and resellers
IRON325AT
IRON325AT is a free-flowing iron powder that consists of solid-dense particles passing through a 45-micron sieve (Mesh 325). This product is versatile and has a variety of uses, including as a filler for rubber, plastics, and resins, which provides weight, magnetic properties, and metal detection properties. IRON325AT is safe for use in food contact applications and cosmetics. Other applications include magnetic pigments, sintered products, powder metallurgy, chemical reactions, soft magnetic composite compounds, magnetism experiments, forensic products, and making magnetic paints.
Key Features:
- Ideal for cold casting of delicate high-precision small objects
- Provides weight, magnetic properties, and metal detection properties
- Safe for use in food contact applications and cosmetics
- Versatile with a wide range of applications
- Highest density among super fine iron powders, suitable for MIM and P&S applications
Product Specifications:
Product | Specification |
Iron | 99 % |
Carbon | 0.001% |
Oxygen | 0.08% |
Sulfur | 0.006% |
Phosphorus | 0.001% |
Screen Analysis: | |
200 (Opening Microns: 75) | Trace |
-200 325 (Opening Microns: 45) | 3% |
-325 | 97% |
Perfect for: Cold casting of delicate high-precision small objects.
Tin Electrodes
Tin Electrodes, length 100mm or more, with an average width of 20mm and a thickness of 1mm. These high-purity Tin electrodes are versatile and suitable for various applications, including electroplating and chemical processes. Tin, known for its silvery-white appearance, is a soft and malleable metal, making it an ideal choice for precise applications where purity is crucial.
Key Features:
- Made from high-purity Tin.
- Versatile for electroplating and chemistry.
Product Specifications:
Material | High Purity Tin |
Length | 100mm or more |
Width | 20mm (average) |
Thickness | 1mm |
Similar Products:
- Silver Electrodes
- Copper Electrodes
- Nickel Electrodes
- Zinc Electrodes
- Lead Electrodes
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for Scientists, Chemists, Metalworkers, Manufacturers, Laboratories
Tin Pellets
Tin Pellets are an excellent choice for those needing high-purity tin (Sn) for various applications. Each pellet, weighing approximately 19 grams, is part of a 1-pound pack designed for ease of melting and application. These pellets are ideal for chemistry and metallurgy experiments, soldering, and providing a protective layer on other metals. Their high purity ensures effectiveness and reliability in every use. Perfect for both professional and educational settings, these pellets also make a valuable addition to any metal collection.
Key Features
- High-purity tin (Sn) content
- Approximately 19 grams per pellet
- 1-pound pack for ease of use
- Ideal for chemistry and metallurgy experiments
- Useful for soldering and protection on other metals
Product Specifications
Size | Approx 19 gr each pellet |
Weight | 1 Lbs |
Usage | Chemistry experiments, metallurgy experiments, soldering, protective layer on other metals |
Purity | High purity tin (Sn) pieces |
Packaging | Pack (1 lbs) |
Similar Products
- Small silver lead-free solder beads
- Pure zinc granules for alloy creation
- High-grade copper mini cubes for experiments
- Small aluminum spheres for casting
- Pure iron filings for magnetic studies
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: Use caution when melting or processing tin pellets. Ensure proper safety measures, including wearing protective gloves and eyewear. Work in well-ventilated areas to avoid inhalation of any fumes. Keep out of reach of children and pets to prevent accidental ingestion or injury.
Perfect for Chemistry students and teachers, Metallurgy enthusiasts, DIYers and hobbyists in soldering and metalworking, Manufacturing and industrial professionals, Artists and sculptors working with metals
Tin Powder, 99.5%
Tin Powder, 99.5% is a high quality, pure tin powder that is commonly used in a variety of industries, including electronics, metallurgy, and chemical manufacturing. This powder is made up of tiny particles that are 99.5% pure tin, making it an excellent choice for applications that require high levels of purity and consistency. Tin Powder, 99.5% is also known for its excellent conductivity and resistance to corrosion, making it a popular choice for use in electrical components and other applications where durability and reliability are key. Whether you're looking for a reliable powder for your manufacturing processes or simply need a high-quality, pure tin powder for your projects, Tin Powder, 99.5% is an excellent choice.
Product Specifications:
Product Name | Tin Powder |
Purity | 99.5% |
Form | Powder |
Molecular Weight | 118.71 g/mol |
Target Group: Metal Industry Professionals
- Manufacturers of tin-based alloys
- Electronics manufacturers
- Chemical laboratories
- Metal fabricators
- Research and development departments
- Industrial engineers
Tin Shot, 8 Mesh, 227 Grams (1/2 Lbs)
If you're looking for a high purity tin (Sn) product for your chemistry or metallurgy experiments, consider Tin Shot 8 Mesh. This pack of 227 grams (1/2 lbs) of tin shots can easily melt and be used for soldering or as a protective layer on other metals. In addition to its practical uses, Tin Shots may also be a valuable addition to your collection of metals.
Product Specifications:
Product Name | Tin Shot |
Mesh Size | 8 Mesh |
Weight | 227 Grams (1/2 Lbs) |
Usage | Chemistry experiments, metallurgy experiments, soldering, protective layer on other metals |
Purity | High purity tin (Sn) pieces |
Packaging | Pack of 227 grams (1/2 lbs) 8 mesh tin shots |
Perfect for:
- Chemistry students and teachers
- Metallurgy enthusiasts
- DIYers and hobbyists interested in soldering and metalworking
- Manufacturing and industrial professionals
- Artists and sculptors who work with metals
- Anyone looking to add high purity tin to their collection of metals
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: Tin shots may pose a hazard if mishandled. Please ensure proper safety measures are taken when using this product. Use in well-ventilated areas and avoid direct contact with skin and eyes. In case of accidental ingestion or inhalation, seek medical attention immediately. Keep out of reach of children and pets.
Titanium Electrode
General Information
The Titanium Electrode is a high purity sheet of Titanium metal, cut to the size 5 x 3/4 inches (about 19mm x 125mm), and is generally used as a Titanium electrode in electricity and chemistry experiments. Each electrode is stamped with letters "Ti" for ease of identification. The thickness of Titanium electrodes is about 0.5 mm up to 1mm. Titanium is a lustrous transition metal with a silver color, low density, and high strength. It is highly resistant to corrosion in seawater, aqua regia, and chlorine.
CAUTION: Titanium electrodes may have sharp edges.
Key Features
- High purity titanium sheet
- Size: 19mm x 125mm (5" x 3/4")
- Stamped with "Ti" identification code
- Thickness: 0.5mm to 1mm
Product Specifications
Feature | Description |
---|---|
Material | High Purity Titanium |
Size (l x w) | 125mm x 19mm (5" x 3/4") |
Quantity | 1 Electrode, Minimum order quantity is 2 |
Identification Code | Stamped with "Ti" |
Thickness | 0.5mm to 1mm |
Grade | Grade 2 |
Carbon, C | <0.08% |
Iron, Fe | <0.3% |
Oxygen, O | <0.25% |
Nitrogen, N | <0.03% |
Hydrogen, H | <0.015% |
Titanium, Ti | Balance |
Titanium Rod - Commercial Grade 2
Looking for a reliable and high-quality titanium rod? Look no further than our Commercial Grade 2 Titanium Rods. These rods are made from high purity titanium, ensuring that they are durable and long-lasting. Each rod measures 11 inches in length with a 1/8 inch diameter, making them versatile and easy to work with. Whether you're a metal collector or need titanium rods for a specific project, our Commercial Grade 2 Titanium Rods are a valuable addition to your collection. Order now in a variety of pack sizes to suit your needs.
Similar Products
- Titanium Bar, Grade 5 Titanium, High Strength and Corrosion Resistance
- Titanium Wire, Grade 1 Titanium, High Purity and Excellent Ductility
- Titanium Sheet, Commercial Grade 1 Titanium, Lightweight and Strong
- Titanium Tube, Grade 9 Titanium, Heat Resistant and Biocompatible
- Titanium Foil, Grade 2 Titanium, Thin and Flexible for Various Applications
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for:
- Metalworking professionals
- Manufacturers
- Scientists and researchers
- Engineering students
- Individuals interested in collecting high-quality metals
CAUTION: Handle with care. Titanium rods may be hazardous if not properly stored or handled.
Product Specifications:
Product Name | Titanium Rod |
Grade | Commercial Grade 2 Titanium |
Length | 11 inches |
Diameter | 1/8 inches |
Pack Sizes | Variation of pack sizes available |
Key Features:
- Commercial Grade 2 Titanium material
- High quality and high purity
- 11" length with 1/8" diameter
- Available in various pack sizes
- Valuable addition to metal collection
Zinc Electrode, Flat, One Piece
Zinc Electrodes are high-purity sheets of zinc metal, cut to the size of 5 x 3/4 inches, and stamped with letters "Zn" for easy identification. These electrodes are versatile and useful, making them ideal for use in electricity and chemistry experiments. Zinc is a bluish-white, lustrous metal that is widely used to produce alloys with other metals, including brass, nickel silver, and commercial bronze. It is also used to produce die castings, which are employed by various industries such as automotive, electrical, and hardware. These zinc plates are not only ideal for functional use in experiments but also for metal collections.
Material | High-purity Zinc Metal |
---|---|
Identification | Stamped with letters "Zn" |
Applications | Electricity and Chemistry Experiments |
Thickness | 0.75mm up to 1mm |
Similar Products
- Copper Electrode, Flat, One Piece
- Aluminum Electrode, Flat, One Piece
- Magnesium Electrode, Flat, One Piece
- Iron Electrode, Flat, One Piece
- Nickel Electrode, Flat, One Piece
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution: Zinc is brittle at ordinary temperatures but malleable at 100 to 150°C. Handle with care when experimenting with high temperatures.
Perfect for:
- Students conducting electricity and chemistry experiments
- Science enthusiasts and hobbyists interested in metal collections
- Industries such as automotive, electrical, and hardware using zinc for die castings
Zinc Plate (6" X 12")
Zinc Plate (6" X 12") with a thickness of 0.030" or 0.75 mm is a versatile and durable material for various applications. Its corrosion-resistant properties make it ideal for use in outdoor settings, while its malleability allows for easy shaping and forming. This zinc plate is perfect for DIY projects, metalworking, and construction. Its compact size makes it easy to handle and transport, and the high-quality material ensures long-lasting performance. Get your hands on this Zinc Plate (6" X 12") today and start creating!
Product Specifications:
Product Name: | Zinc Plate |
Size: | 6" X 12" |
Thickness: | 0.030" Or 0.75 Mm |
Similar Products
- Galvanized Steel Sheet, (12" X 24"), Thickness 0.025" Or 0.63 Mm
- Aluminum Sheet, (6" X 12"), Thickness 0.040" Or 1.0 Mm
- Copper Sheet, (6" X 12"), Thickness 0.032" Or 0.8 Mm
- Brass Sheet, (6" X 12"), Thickness 0.025" Or 0.63 Mm
- Stainless Steel Sheet, (6" X 12"), Thickness 0.030" Or 0.75 Mm
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution: Zinc plates may cause skin irritation or respiratory problems if not handled properly. Use protective gloves and a mask when handling.
Perfect for:
- Manufacturing companies that require zinc plates for their products
- Artists and craftsmen who use zinc plates for printmaking
- DIY enthusiasts who need zinc plates for various projects
- Builders and contractors who use zinc plates for construction purposes
- Metalworking shops that specialize in zinc fabrication
- Individuals who need high-quality zinc plates for their personal use
Zinc Plate (6" X 9")
Zinc Plate (6" X 9") is a high-quality metal plate with a thickness of 0.030" or 0.75 mm. This plate is perfect for a variety of applications, including construction, manufacturing, and DIY projects. The zinc material provides excellent corrosion resistance, making it ideal for outdoor use. Its compact size and lightweight design make it easy to handle and transport. Whether you're a professional contractor or a DIY enthusiast, Zinc Plate (6" X 9") is a must-have for any project.
Product Specifications:
Product Name | Zinc Plate |
Dimensions | 6" X 9" |
Thickness | 0.030" Or 0.75 Mm |
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution: Zinc plates may pose a hazard if not handled properly. Please wear gloves and eye protection when working with this material.
Perfect for:
- Artists and printmakers
- Jewelry makers
- Metalworkers
- Engravers
- Crafters
- DIY enthusiasts
Zinc Plate (6" x 6")
Looking for a durable and corrosion-resistant material for your next project? Look no further than our Zinc Plate. Measuring in at 6" x 6" and with a thickness of 0.030" or 0.75 mm, this Zinc Plate is perfect for a variety of applications. Whether you're creating custom signage or need a sturdy backing for your artwork, this Zinc Plate is up to the task. Plus, with its sleek and modern look, it's sure to add a touch of sophistication to any project. So why wait? Order your Zinc Plate today and start creating something truly unique!
Product Specifications:
Product Name: | Zinc Plate |
Dimensions: | 6" X 6" |
Thickness: | 0.030" Or 0.75 Mm |
Perfect for:
- Artists and printmakers who require high-quality zinc plates for their work
- Industrial manufacturers who need durable and corrosion-resistant metal plates for their products
- Jewelry makers who use zinc plates for etching and engraving designs
- Engineering students and professionals who require zinc plates for experiments and prototypes
- DIY enthusiasts who enjoy metalworking and crafting projects
- Builders and construction workers who need zinc plates for roofing and flashing applications
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution: Zinc plates may be hazardous if not handled properly. Use protective gloves and avoid inhaling dust or fumes during use.
Zinc Plate, One Square Foot (12" X 12"), Thickness 0.030" Or 0.75 Mm
This Zinc Plate is a high-quality metal sheet that measures one square foot (12" X 12") and has a thickness of 0.030" or 0.75 mm. It is perfect for a variety of applications, including construction, manufacturing, and DIY projects. Made from durable and corrosion-resistant zinc, this plate is designed to withstand the test of time. Whether you need a sheet, powder, or square, this Zinc Plate is an excellent choice for anyone looking for a reliable and versatile metal plate.
Key Features:
- High quality zinc material
- Dimensions of 12" x 12" for easy handling
- Thickness of 0.030" or 0.75 mm for durability
- Square shape for versatility in use
- Comes in sheet form for easy customization
- Powder coating for added protection and aesthetic appeal
Product Specifications:
Product Name | Zinc Plate |
Size | One Square Foot (12" X 12") |
Thickness | 0.030" Or 0.75 Mm |
Shape | Square |
Type | Sheet, Powder, Metal Zinc Plate |
Similar Products
- Zinc Sheet, 12" X 24", Thickness 0.040" Or 1.00 Mm, Square, Powder, Metal
- Zinc Plate, 6" X 12", Thickness 0.020" Or 0.50 Mm, Square, Sheet, Powder, Metal
- Zinc Plate, One Square Foot (12" X 12"), Thickness 0.060" Or 1.50 Mm, Square, Sheet, Powder, Metal
- Zinc Plate, 8" X 8", Thickness 0.025" Or 0.63 Mm, Square, Sheet, Powder, Metal
- Zinc Plate, 24" X 24", Thickness 0.080" Or 2.00 Mm, Square, Sheet, Powder, Metal
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution: This product contains metal zinc which may be hazardous if ingested or inhaled. Use protective gear when handling and keep out of reach of children.
Perfect for:
- Artists and craftsmen who need a durable and versatile material for their projects
- DIY enthusiasts who want to create unique home decor or gifts
- Metalworkers who need a high-quality zinc plate for their work
- Students and educators who want to teach or learn about metalworking and sculpture
- Manufacturers who need a reliable source of zinc plates for their products
Zinc Plate, Strip Of Zinc Sheet Metal (3" X 12")
Looking for a reliable and durable zinc plate for your next project? Look no further than our Zinc Plate, Strip Of Zinc Sheet Metal (3" X 12"), with a thickness of 0.030" or 0.75 mm. This sheet plate is perfect for a variety of applications, including roofing, gutters, and decorative accents. Made of high-quality zinc, this plate is resistant to corrosion and rust, making it an ideal choice for outdoor use. Don't settle for anything less than the best - choose our Zinc Plate, Strip Of Zinc Sheet Metal (3" X 12") for your next project.
Key Features:
- Made of high-quality zinc material
- Comes in a convenient strip of zinc sheet metal (3" x 12")
- Thickness of 0.030" or 0.75 mm for durability and strength
- Can be used for various applications such as roofing, flashing, and guttering
- Resistant to corrosion and rust for long-lasting use
- Easy to cut and shape for customized use
Product Specifications:
Product Name | Zinc Plate, Strip Of Zinc Sheet Metal (3" X 12") |
Thickness | 0.030" Or 0.75 Mm |
Material Type | Sheet, Plate |
Dimensions | Zinc Plate, Strip Of Zinc Sheet Metal (3" X 12"), Thickness 0.030" Or 0.75 Mm |
Additional Information | Zinc Plate, Strip Of Zinc Sheet Metal (3 |
Similar Products
- Galvanized Steel Sheet Metal (4" x 12"), Thickness 0.035" or 0.89 mm
- Zinc Plated Steel Sheet Metal (3" x 10"), Thickness 0.028" or 0.71 mm
- Aluminum Sheet Metal (3" x 12"), Thickness 0.040" or 1.02 mm
- Copper Sheet Metal (3" x 12"), Thickness 0.032" or 0.81 mm
- Stainless Steel Sheet Metal (3" x 12"), Thickness 0.025" or 0.64 mm
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution: Zinc Plate and Strip of Zinc Sheet Metal may pose a hazard if not handled properly. Use appropriate protective gear and handle with care.
Perfect for:
- DIY enthusiasts and hobbyists who need high-quality zinc sheet metal for their projects
- Construction professionals who require durable and reliable zinc plates for their work
- Artists and sculptors who need a versatile material for their creations
- Manufacturers who use zinc sheet metal in their production processes
- Individuals who need zinc plates for roofing, gutters, and other household applications
- Engineering students and professionals who need zinc sheet metal for experiments and research