CU12HP Copper Granules

Coarse copper powder is made of solid metalic high purity copper metal. Particles are almost in equal size with appearance of metalic spherical crystals.
Recomended for wood inlay, art and industrial applications where solid round multi-side balls may be used.
CAS No.: 7440-50-8

Note: Pure copper powders do not show continuity or conductivity when tested with a multimeter. This might be due to two reasons. One reason is the low voltage used for the test. The other reason is the presence of air and weak contacts between the particles. They will exhibit conductivity with higher voltage, when compacted, and when mixed with some oil or resin to form a paste.

Safety Data Sheet for Copper Powder

Key Features

• High purity solid copper
• Coarse, 16 mesh size
• Metallic spherical crystals
• Versatile for wood inlays and art
• Uniform particle size distribution

Product Specifications

Similar Products

• Bronze spherical powder, artistic use
• Silver fine granules, jewelry inlay
• Aluminum coarse powder, industrial grade
• Brass micro pellets, precision casting
• Iron filings, metallic craft supplies

CU165: Copper Powder 99.3%, 150 Mesh

The most popular and widely used copper powder, produced by water atomization method followed by hydrogen reduction. Applications include production of copper compounds, catalyst in chemical formulations, abrasive wheels, carbon brushes, and more.
HTS Code: 7406.10.0000
NMFC: 30743
CAS: 7440-50-8

Note: Pure copper powders do not show continuity or conductivity when tested with a multimeter. This might be due to two reasons. One reason is the low voltage used for the test. The other reason is the presence of air and weak contacts between the particles. They will exhibit conductivity with higher voltage, when compacted, and when mixed with some oil or resin to form a paste.

Safety Data Sheet for Copper Powder

Key Features

• 99.3% pure copper
• Water atomized and hydrogen reduced
• Fine mesh for versatile use
• Suitable for a range of industrial applications
• Enhanced conductivity under specific conditions

Product Specifications

Similar Products

• High-purity, fine-grain, silver powder
• Atomized aluminum powder, 99% purity
• Bronze powder, water-atomized, industrial grade
• Nickel powder, 99.5% pure, chemical applications
• Zinc dust, fine mesh, high purity

Beeswax, Refined white natural beeswax

Natural Beeswax is used as a building material for honeycombs. Because of its soft, pliable nature, bee wax Cera Alba) remains an indispensable raw material for many finished products even after centuries of commercial use.
Applications:
Creams, Lotions, Lipsticks, Cold Creams, Depilatories, Ointments, Salves, Pharmaceutical Excipients, Food Additive, Food Inks and Coatings, Non-food Inks and Coatings, Emulsions, Color Cosmetics, Hair Care; Furniture, Wood, and Leather Polishes; Textile, Wood, and Paper Finishes; Lubricants, Candles, Moldings, and numerous industrial applications.

CAS#: 8012-89-3 White Refined Beeswax
EINECS: 232-383-7
Beeswax is F.D.A. approved under Regulations 21 CFR 184.`1973 & CFR 184.1975
C.T.F.A. Listed

Key Features

• Versatile and multi-industry use
• High purity and quality
• Soft, pliable texture
• FDA-approved for safety
• Suitable for food and cosmetics

Product Specifications

Similar Products

• Soft, yellow natural beeswax pellets
• Organic, pliable, cosmetic-grade beeswax
• Pure, white beeswax sheets for crafts
• Natural, food-grade beeswax bars
• Eco-friendly, refined beeswax flakes

Steel Powder, Spherical Mesh 50 (IP50M)

Steel Powder, Spherical Mesh 50 (IP50M) is crafted from a high-grade, low-carbon magnesium steel alloy known for its reliability in precision industrial applications. This powder features 95% spherical particles that enhance flow consistency and density, making it suitable for uses requiring high accuracy and controlled impact. With a particle size around 0.1 mm, it excels in non-lethal wildlife dispersal, pyrotechnics, and dense part manufacturing for aerospace and automotive industries. The consistent dark gray color and bulk density of 4.3 g/cc provide aesthetic and functional advantages across applications.

Key Features

• Low-Carbon Magnesium Steel Alloy: Ensures durability for industrial use.
• 95% Spherical Particles: Enables uniform flow and compaction.
• Apparent Bulk Density of 4.3 g/cc: Ideal for dense, controlled applications.
• Uniform Dark Gray Color: Supports quality control standards.
• Particle Diameter ~0.1 mm: Suitable for impact and dispersion.

Product Specifications

CAUTION: Contains steel powder; avoid inhalation or ingestion. Use protective gear.

CU41, Copper Powder, Mesh 40 (Coarse)

High purity atomized copper powder -40/ 100 US Mesh has the largest grains compared with our other copper powder products. It is also usually darker in color. Minimum purity: 99.0%. Typical Apparent Density: 2.4. Nominal Mesh: -40/ 100. HTS Code: 7406.10.0000. NMFC: 30743. CAS: 7440-50-8. Typical Analysis: Copper: 99.87%, Hydrogen Loss: 0.21%, Apparent Density: 2.57 g/cc. Sieve Analysis: 40 mesh 0%, -40/ 100 mesh 90.4%, -100/ 140 mesh 9%, -140 mesh 0.6%.

Key Features

• High purity, minimum 99.0%
• Coarse grain size, -40/ 100 US Mesh
• Dark color, distinct appearance
• Apparent Density: 2.57 g/cc
• Comprehensive sieve analysis included

Product Specifications

Similar Products

• Fine grain, 99% pure copper powder
• Medium grain, dark copper powder
• High-density, fine copper powder
• Coarse, 98% pure copper flakes
• Atomized, spherical copper granules

Mechanical Industrial Counter, 5 Digit

The MSJL1145 is a 5 digit mountable mechanical industrial counter that is commonly used as a recording instrument for machinery. It counts the number of times a part moves back and forth and is ideal for use with punch or press machines, printing machines, packaging machines, and more. This ratchet type counter can count up to 100,000, from 00000 up to 99999, and has a reset knob on the left and the counting arm on the right. The angle of the counting arm is adjustable and is attached to a spring for pulling the arm, which is used to reduce or absorb any mechanical shock that may reach the counter.

This general-purpose machine stroke counter is superb in quality and reliability, and is made in China. It has a metal frame/base that can be mounted using four screws, and measures 56mm x 47mm. Machine counters are also known as clicker, stroke counter, and pull counter.

Stearic Acid Flakes (Vegetable Source)

Stearic Acid Flakes, derived most likely from vegetable sources, is a saturated fatty acid known for its versatility in various industrial and cosmetic applications. With an 18-carbon chain, stearic acid is a soft, waxy solid commonly used in the production of soaps, candles, cosmetics, and lubricants. The IUPAC name for stearic acid is octadecanoic acid, and its chemical formula is CH₃(CH₂)₁₆CO₂H. It is valued in cosmetic formulations for its thickening properties, ability to stabilize formulations, and enhance the texture and shelf-life of products. Stearic acid also acts as an emulsifier, helping to blend oil and water-based ingredients.

With a melting point of 156.7°F (69.3°C) and a boiling point of 681.8°F (361°C), stearic acid flakes offer high stability, making them suitable for use in a wide range of temperatures. Its molar mass is 284.48 g/mol, and it has a density of 941 kg/m³, making it a reliable choice for consistent performance in manufacturing processes.

Key Features

• Derived from vegetable sources
• Soft, waxy solid form
• Ideal for cosmetics, soaps, and candles
• Effective emulsifier and thickening agent
• High stability across a range of temperatures
• Enhances texture and shelf-life of products

Product Specifications:

Synthetic Beeswax Pastilles

These Synthetic Beeswax Pastilles are expertly formulated to closely replicate the properties of natural beeswax. Ideal for a wide range of applications, they are derived from non-animal sources, making them an excellent choice for environmentally conscious and vegan-friendly formulations.

Compatibility:
Plant, Animal and Mineral Waxes; Fatty Acids, Fatty Alcohols, Glycerides, Hydrocarbons, Synthetic Waxes and most other Waxes, Resins and Oils.
CAS#: 71243-51-1
EINECS#: 275-286-5

Key Features

• Plant-based and vegan-friendly
• High compatibility with other waxes and resins
• Consistent melting point and chemical values
• Wide range of applications in personal care and industrial products
• Non-animal raw material source

Product Specifications

Similar Products

• Plant-based wax pellets for cosmetics
• Natural soy wax flakes for candles
• Organic carnauba wax for polishes
• Eco-friendly candelilla wax beads
• Vegetable-based emulsifying wax for lotions