Advanced Search Results
Refine your search by using the category filter.
CIPMS (Carbonyl Iron Powder/ Zero Valent Iron powder microspheres)
General Information
CIPMS is a high-purity iron microsphere product made from Carbonyl Iron Powder and Zero Valent Iron powder. The microspheres range in size from 3 to 10 microns, and are manufactured using special technology that ensures a purity of 99.5% or greater.
Key Features
- High-purity iron microspheres
- Outstanding magnetization behavior
- Applications include metal injection molding, inductive electronic components, microwave absorption, magnetic ink, and magnetic plastic parts
- Limited Quantity Product
Product Specifications
Fe | 97.8% - 99.5% |
---|---|
C max | 0.75-0.90% |
N max | 0.65-0.90% |
O max | 0.15 - 0.40% |
d10 | 1.7 - 2.7 Micron |
d50 | 3.9 - 5.2 Micron |
d90 | 7.2 - 9.2 Micron |
Similar Products
- Nano Iron Powder
- Iron Oxide Powder
- Electrolytic Iron Powder
- Atomized Iron Powder
- Micron Iron Powder
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
300SC Iron Powder
300SC is a fine, high purity iron powder specifically designed for industrial seed cleaning applications. It is a mesh 300 product containing spheroidal and irregular easy flow particles.
Typical chemical analysis shows 99% iron content with low levels of impurities such as carbon, oxygen, sulfur, and phosphorus. The typical screen analysis shows a trace amount of material retained on a 200 US Standard Sieve and 3% retained on a -200 325 sieve with 97% passing through a -325 sieve.
Key Features:
- High purity iron powder for industrial seed cleaning
- Mesh 300 product containing spheroidal and irregular easy flow particles
- Qualified and tested for industrial seed cleaning applications
- 99% iron content with low levels of impurities
- Typical screen analysis shows 97% passing through a -325 sieve
Product Specifications:
Chemical Analysis | Typical Values |
Iron | 99% |
Carbon | 0.00% |
Oxygen | 0.05% |
Sulfur | 0.006% |
Phosphorus | 0.001% |
Similar Products:
- Copper Powder
- Zinc Powder
- Aluminum Powder
- Manganese Powder
- Nickel Powder
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
IRON325AT
IRON325AT is a free-flowing iron powder that consists of solid-dense particles passing through a 45-micron sieve (Mesh 325). This product is versatile and has a variety of uses, including as a filler for rubber, plastics, and resins, which provides weight, magnetic properties, and metal detection properties. IRON325AT is safe for use in food contact applications and cosmetics. Other applications include magnetic pigments, sintered products, powder metallurgy, chemical reactions, soft magnetic composite compounds, magnetism experiments, forensic products, and making magnetic paints.
Key Features:
- Ideal for cold casting of delicate high-precision small objects
- Provides weight, magnetic properties, and metal detection properties
- Safe for use in food contact applications and cosmetics
- Versatile with a wide range of applications
- Highest density among super fine iron powders, suitable for MIM and P&S applications
Product Specifications:
Product | Specification |
Iron | 99 % |
Carbon | 0.001% |
Oxygen | 0.08% |
Sulfur | 0.006% |
Phosphorus | 0.001% |
Screen Analysis: | |
200 (Opening Microns: 75) | Trace |
-200 325 (Opening Microns: 45) | 3% |
-325 | 97% |
Perfect for: Cold casting of delicate high-precision small objects.
Carbon Electrode - Graphite Rod
Durable, high purity, high density, high conductivity graphite rod with a diameter of 10-mm and length of 100 mm.
Key Features
- High purity, density and conductivity
- Durable
- 10 mm x 100 mm size
Product Specifications:
Density: | 1.75 g/cc |
Electric Resistivity: | 8-11 mega Ohm |
Thermal Conductivity: | 121.1 W/m.k |
Coefficient of thermal expansion: | 5.46 /ºC |
Shore Hardness: | 42 HSD |
Breaking Strength: | 38 MPa |
Compressive Strength: | 65 MPa |
Elasticity Modulus: | 9 Gpa |
Gas hole ratio: | 17% |
Granularity: | 13-15 micro |
Similar Products:
- Graphite Electrode - High Purity, 8 mm x 100 mm
- Carbon Electrode - High Density, 10 mm x 150 mm
- Graphite Rod - High Conductivity, 10 mm x 200 mm
- Carbon Rod - High Strength, 10 mm x 100 mm
- Graphite Electrode - High Temperature Resistance, 10 mm x 100 mm
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for scientists, engineers, and researchers in need of a high-quality graphite rod for various laboratory applications.
CU12HP Copper Granules
Coarse copper powder is made of solid metalic high purity copper metal. Particles are almost in equal size with appearance of metalic spherical crystals.
Recomended for wood inlay, art and industrial applications where solid round multi-side balls may be used.
CAS No.: 7440-50-8
Note: Pure copper powders do not show continuity or conductivity when tested with a multimeter. This might be due to two reasons. One reason is the low voltage used for the test. The other reason is the presence of air and weak contacts between the particles. They will exhibit conductivity with higher voltage, when compacted, and when mixed with some oil or resin to form a paste.
Safety Data Sheet for Copper Powder
Key Features
- High purity solid copper
- Coarse, 16 mesh size
- Metallic spherical crystals
- Versatile for wood inlays and art
- Uniform particle size distribution
Product Specifications
Material | Solid Metallic Copper |
Mesh Size | 16 Mesh |
Appearance | Metallic Spherical Crystals |
Applications | Wood Inlay, Art, Industrial |
CAS Number | 7440-50-8 |
Similar Products
- Bronze spherical powder, artistic use
- Silver fine granules, jewelry inlay
- Aluminum coarse powder, industrial grade
- Brass micro pellets, precision casting
- Iron filings, metallic craft supplies
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for artisans, woodworkers, industrial manufacturers, jewelers, and artists
CU165: Copper Powder 99.3%, 150 Mesh
The most popular and widely used copper powder, produced by water atomization method followed by hydrogen reduction. Applications include production of copper compounds, catalyst in chemical formulations, abrasive wheels, carbon brushes, and more.
HTS Code: 7406.10.0000
NMFC: 30743
CAS: 7440-50-8
Note: Pure copper powders do not show continuity or conductivity when tested with a multimeter. This might be due to two reasons. One reason is the low voltage used for the test. The other reason is the presence of air and weak contacts between the particles. They will exhibit conductivity with higher voltage, when compacted, and when mixed with some oil or resin to form a paste.
Safety Data Sheet for Copper Powder
Key Features
- 99.3% pure copper
- Water atomized and hydrogen reduced
- Fine mesh for versatile use
- Suitable for a range of industrial applications
- Enhanced conductivity under specific conditions
Product Specifications
Purity | 99.3% |
Apparent Density | 2.7 g/cc |
Nominal Mesh | -140 -325 mesh ratio > 50% |
Applications | General purpose, brazing, chemical, electronics, etc. |
Conductivity Note | Conductive under high voltage or when mixed with oil/resin |
Similar Products
- High-purity, fine-grain, silver powder
- Atomized aluminum powder, 99% purity
- Bronze powder, water-atomized, industrial grade
- Nickel powder, 99.5% pure, chemical applications
- Zinc dust, fine mesh, high purity
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for industrial manufacturers, chemical processing companies, electronics producers, automotive parts manufacturers, and research and development laboratories.
Copper Sulfate, Pentahydrate
Copper Sulfate (Copper (II) Sulfate; Copper Sulphate; Cupric Sulfate; Blue Vitriol; Blue Stone, Blue Copperas) CuSO4.5H2O
High purity grade, 99.9%.
Uses: Electroplating; feed additive; germicides; textile mordant; leather industry; pigments; electric batteries; copper salts; wood preservative; in agriculture(soil additive, pesticides, fungicide).
Toxic by ingestion.Strong irritant.
CAS # [7758-99-8](CuSO4.5H2O)
Safety Data Sheet for Copper Sulfate
Key Features:
- High-purity grade copper sulfate
- Purity level of 99.9%
- Various applications in electroplating, agriculture, and industrial uses
- Also known as Copper (II) Sulfate, Copper Sulphate, Cupric Sulfate, Blue Vitriol, or Blue Stone
Product Specifications:
CAS Number | 7758-99-8 (CuSO4.5H2O) |
Purity Level | 99.9% |
Cautions and Warnings:
Toxic by ingestion. Strong irritant. Handle with care and avoid contact with skin or eyes. Keep out of reach of children.
Similar Products:
- Anhydrous Copper Sulfate
- Copper Oxide
- Copper Carbonate
- Copper Nitrate
- Copper Chloride
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for electroplating, agriculture, and industrial applications.
Safety Data Sheet for Copper Powder
CU41, Copper Powder, Mesh 40 (Coarse)
High purity atomized copper powder -40/ 100 US Mesh has the largest grains compared with our other copper powder products. It is also usually darker in color. Minimum purity: 99.0%. Typical Apparent Density: 2.4. Nominal Mesh: -40/ 100. HTS Code: 7406.10.0000. NMFC: 30743. CAS: 7440-50-8. Typical Analysis: Copper: 99.87%, Hydrogen Loss: 0.21%, Apparent Density: 2.57 g/cc. Sieve Analysis: 40 mesh 0%, -40/ 100 mesh 90.4%, -100/ 140 mesh 9%, -140 mesh 0.6%.
Key Features
- High purity, minimum 99.0%
- Coarse grain size, -40/ 100 US Mesh
- Dark color, distinct appearance
- Apparent Density: 2.57 g/cc
- Comprehensive sieve analysis included
Product Specifications
Purity | 99.87% |
Hydrogen Loss | 0.21% |
Apparent Density | 2.57 g/cc |
Mesh Size | >40 mesh 0% -40/ 100 mesh 90.4% -100/ 140 mesh 9% -140 mesh 0.6% |
HTS Code | 7406.10.0000 |
NMFC | 30743 |
CAS Number | 7440-50-8 |
Similar Products
- Fine grain, 99% pure copper powder
- Medium grain, dark copper powder
- High-density, fine copper powder
- Coarse, 98% pure copper flakes
- Atomized, spherical copper granules
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for Industrial Manufacturers, Metal Fabrication Professionals, Chemical Industry Experts, Research and Development Teams, Specialty Alloy Producers
Fine Iron Powder Acid Soluble
Fine Iron Powder is a high-quality, acid-soluble powder ideal for facilitating quick chemical reactions. Its versatility makes it an excellent choice for various applications, including the production of hydrogen gas, wood stains, Iron Sulfate (Ferrous Sulfate), and other iron-based chemicals. The powder exhibits exceptional solubility in diluted sulfuric acid, diluted hydrochloric acid, and diluted acetic acid (Vinegar), ensuring efficient reactions and desired outcomes.
Key Features:
- Facilitates quick chemical reactions
- Enables hydrogen gas production
- Ideal for wood stains
- Suitable for iron-based chemical production
- Highly soluble in diluted acids
Product Specifications:
Specification | Details |
Particle Size | Fine |
Solubility | Acid Soluble |
Applications | Chemical Reactions, Hydrogen Gas Production, Wood Stains, Iron-Based Chemicals |
Similar Products:
- Iron Filings for Chemical Reactions
- Iron Powder for Metallurgical Applications
- Fine Metal Powders for Industrial Use
- Iron Sulfate for Water Treatment
- Iron-Based Catalysts for Chemical Synthesis
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution: If cautions, hazards, or warnings don't exist, this section will be hidden.
Perfect for chemists, chemical manufacturers, industrial researchers, and professionals seeking effective iron-based solutions.
- 1