Advanced Search Results
Refine your search by using the category filter.
High-purity, high-density spherical copper powder for enhanced conductivity and versatility.
Finest grade, 5-micron iron powder for chemical and magnetic applications.
For MSDS Go to Downloads TabCU118SP Copper Powder, Fine, Spherical
Our specification guarantees that at least 80% of this powder are particles smaller than 44 micron. A typical analysis however shows that 88% of particles are smaller than 44 micron. Most particles are between 16 micron and 28 micron.
Applications include cold casting, 3-D printer filaments, metal clay, sintering, Green/ blue patina and rust effect, preventing mold in concrete, plaster,dry-wall, paint, adhesives and grout.
Also used in 3D printing process known as Selective Powder Deposition (SPD)
Note: Pure copper powders do not show continuity or conductivity when tested with a multimeter. This might be due to two reasons. One reason is the low voltage used for the test. The other reason is the presence of air and weak contacts between the particles. They will exhibit conductivity with higher voltage, when compacted, and when mixed with some oil or resin to form a paste.
Safety Data Sheet for Copper Powder
Key Features:
- High-purity, high-density spherical copper powder
- Provides high heat conductivity and electrical conductivity
- Suitable for various applications, including cold casting, 3-D printer filaments, metal clay, sintering, green/blue patina and rust effect, preventing mold in concrete, plaster, dry-wall, paint, adhesives, and grout
- Used in the 3D printing process known as Selective Powder Deposition (SPD)
- Particle size distribution with 88% of particles smaller than 44 micron
Product Specifications:
| Copper Purity | Over 99.5% |
| Hydrogen Loss | Less than 0.7% |
| Apparent Density | 4.5-5.5 g/cc |
| Typical Analysis | Copper > 99.5% Hydrogen Loss < 0.7% Apparent Density, g/cc: 4.5 - 5.5 Passing mesh 325 (44 micron): 80% ~ 88% |
Similar Products:
- Ultra-Fine Copper Powder
- High-Purity Copper Foil
- Copper Wire
- Copper Rod
- Copper Sheet
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for enhanced conductivity and versatility applications, including cold casting, 3-D printing, metal clay, and more.
Iron Powder, Micronized, Light
Micronized low-density iron powder is one of the finest iron powders available, featuring irregular and flake particles as small as 5 microns. This high-purity, electronic-grade iron dust is ideal for numerous specialized applications. However, due to the small particle size, up to 2-3% of this product may oxidize on the surface during the grinding and packaging processes.
This product serves a wide variety of functions across different industries. It can be used in chemical reactions, as filler metal for plastic or epoxy compounds, in mirror backing, for high-density powder metallurgy (P/M) parts, or as a carrier for photocopy toners. The powder is also an excellent matrix metal for diamond bonding and can be used in various ferromagnetic applications. Additional uses include fingerprinting powders, magnetic inks, and magnetic paints.
However, caution is required when handling, as fine iron dust can form an explosive mixture in the air. Always avoid inhalation, and use a mask and protective clothing during handling.
Key Features
- High-purity, electronic-grade iron powder with 5-micron particles.
- Ideal for chemical reactions, diamond bonding, and ferromagnetic applications.
- Used in fingerprint powders, magnetic inks, and magnetic paints.
- Surface oxidation of 2-3% may occur during packaging.
- Versatile industrial applications including P/M parts and epoxy filler metals.
Product Specifications
| Particle Size | 5 microns |
| Purity | High-purity electronic grade |
| Density | Low-density |
| Oxidation Rate | 2-3% during packaging |
| Applications | Chemical reactions, plastic fillers, magnetic inks, diamond bonding |
Perfect for chemical professionals, magnetic ink manufacturers, epoxy compound producers, and powder metallurgy experts.
Zinc Powder Micronized
Zinc Powder Micronized (Fine Zinc Metal Powder, Mesh 325) is a high-quality zinc metal powder that has been finely micronized for superior performance. This powder is ideal for a wide range of applications, including coatings, paints, and pigments. The fine mesh size of 325 ensures that the powder is easy to work with and provides excellent coverage and adhesion. Zinc Powder Micronized is a versatile and reliable product that is perfect for any project that requires a high-quality zinc powder.
Product Specifications:
| Product Name | Zinc Powder Micronized |
| Type | Fine Zinc Metal Powder |
| Mesh Size | 325 |
| Thickness | Powder |
| Form | Micronized |
| Material | Metal |
Similar Products
- Zinc Oxide Powder (Pure Pharmaceutical Grade)
- Zinc Dust (High Purity Zinc Metal Powder, Mesh 100)
- Zinc Stearate Powder (Fine White Powder, Lubricant and Release Agent)
- Zinc Sulfate Powder (Fertilizer and Animal Feed Additive)
- Zinc Chloride Powder (Flux and Wood Preservative)
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: This product may be hazardous if ingested or inhaled. Avoid contact with eyes and skin. Use protective equipment when handling. Keep out of reach of children.
Perfect for:
- Manufacturers of metal coatings and paints
- Pharmaceutical companies producing zinc-based supplements
- Cosmetic companies creating zinc-infused skincare products
- Research and development teams studying the properties of zinc
- Industrial companies using zinc powder in the production of alloys
- Jewelry makers utilizing zinc powder in the creation of metal jewelry
- 1